431 Ipuleti Lensimbi Engagqwali

Incazelo emfushane:

Insimbi engagqwali engu-431 iyinsimbi engagqwali ye-martensitic enikeza ukumelana nokugqwala okuhle kakhulu, ukuqina okuphezulu, namandla aqinile aqinile.Amapuleti ensimbi engagqwali angu-431 atholakala ngobukhulu obuhlukahlukene nobukhulu, futhi angenziwa ngokwezifiso ukuze ahlangabezane nezidingo ezithile zephrojekthi.


  • Ubuso:2B, 2D, BA, NO. 1, NO. 4
  • Ubukhulu:0.25-200mm
  • Ifomu:Ishidi Leshim, Ishidi Elinezimbobo
  • Icebo:Ipuleti eligoqiwe elishisayo (HR), ishidi eligoqiwe elibandayo (CR)
  • Imininingwane Yomkhiqizo

    Omaka bomkhiqizo

    431 Stainless Steel Plates Umbukiso Wesevisi One stop:

     

    Amapuleti ensimbi engagqwali angu-431 atholakala ngobukhulu obuhlukahlukene nobukhulu obuhlukahlukene, futhi angenziwa ngokwezifiso ukuze ahlangabezane nezidingo ezithile zephrojekthi. Lawa mapuleti aziwa ngokukwazi ukumelana namazinga okushisa aphezulu kanye nokumelana kwawo nokukala emazingeni okushisa afinyelela ku-800°C. Zifanele futhi izinhlelo zokusebenza ezidinga inhlanganisela yokumelana nokugqwala kanye nezakhiwo eziphezulu zemishini.

    Imininingwane ye-431ishidi lensimbi engagqwali:
    Ibanga 431
    Ububanzi 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, njll.
    Ubude 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, njll.
    Ubukhulu 0.25 mm kuya ku-200 mm
    Ubuchwepheshe Ipuleti eligoqiwe elishisayo (HR), ishidi eligoqiwe elibandayo (CR)
    I-Surface Qeda 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, hair line, sand blast, Brush, SATIN (Met with Plastic Coated) njll.
    I-Raw Materail I-POSCO, i-Baosteel, i-TISCO, i-Saky Steel, i-Outokumpu
    Ifomu Amakhoyili, amaFoil, amaRoli, Ishidi elingenalutho, Ishidi leShim, Ishidi Elinezimbobo, Ipuleti Elinophawu, Umdweshu, Amafulethi, njll.

     

    431 Plate Amabanga alinganayo:
    Ibanga I-UNS I-WERKSTOFF NR. I-JIS BS
    431 S43100 1.4057 I-SUS431 431S29

     

    431 AmaSpredishithi, Amapuleti Ukubunjwa Kwamakhemikhali kanye Nezakhiwo Zemishini(saky steel):
    Ibanga C Mn Si P S Cr Ni
    431 0.20 ubuningi 1.00 ubuningi 1.00 ubuningi 0.040 ubuningi 0.03 ubuningi 15.00 - 17.00 1.25 – 2.5

     

    Amandla Okuqina Amandla Esivuno (0.2%Offset) Ukwelula
    655-850Mpa 485Mpa 20 %

     

    Kungani Usikhethe:

    1. Ungathola impahla ephelele ngokuvumelana nemfuneko yakho okungenani inani elingenzeka.
    2. Siphinde sinikeze ama-Reworks, i-FOB, i-CFR, i-CIF, nezintengo zokudiliva umnyango nomnyango. Siphakamisa ukuthi wenze isivumelwano sokuthunyelwa okuzokonga kakhulu.
    3. Izinto esizihlinzekayo zingaqinisekiswa ngokuphelele, kusukela kusitifiketi sokuhlolwa kwempahla engavuthiwe kuya esitatimendeni sobukhulu bokugcina.(Imibiko izovela ngokwemfuneko)
    4. isiqinisekiso sokunikeza impendulo phakathi namahora angu-24(imvamisa ngehora elifanayo)
    5. Nikeza umbiko we-SGS TUV.
    6. Sizinikele ngokugcwele kumakhasimende ethu. Uma kungeke kwenzeke ukuhlangabezana nezidingo zakho ngemva kokuhlola zonke izinketho, ngeke sikudukise ngokwenza izithembiso ezingamanga ezizodala ubudlelwano obuhle namakhasimende.
    7.Nikeza isevisi eyodwa-stop.

    Ukuqinisekisa Ikhwalithi Ye-SAKY STEEL (okuhlanganisa kokubili Okubhubhisayo Nokungabhidlizi) :

    1. Visual Dimension Test
    2. Ukuhlolwa kwemishini njengokushuba, Ukwelula kanye nokunciphisa indawo.
    3. Ukuhlaziywa komthelela
    4. Ukuhlaziywa kokuhlolwa kwamakhemikhali
    5. Ukuhlolwa kokuqina
    6. Ukuhlolwa kokuvikela umgodi
    7. Ukuhlolwa Okungenele
    8. I-Intergranular Corrosion Testing
    9. Ukuhlolwa Kokuqina
    10. Ukuhlolwa Kokuhlola Kwe-Metallography

     

    Iphakheji ye-SAKY STEEL'S:

    1. Ukupakisha kubaluleke kakhulu ikakhulukazi endabeni yokuthunyelwa kwamanye amazwe lapho impahla idlula eziteshini ezihlukahlukene ukuze ifike lapho kuyiwa khona, ngakho sibeka ukukhathazeka okukhethekile mayelana nokupakisha.
    2. I-Saky Steel ipakisha izimpahla zethu ngezindlela eziningi ngokusekelwe emikhiqizweni. Sipakisha imikhiqizo yethu ngezindlela eziningi, njengokuthi,

    ukupakisha amapuleti


  • Okwedlule:
  • Olandelayo:

  • Imikhiqizo Ehlobene