2304/S32304 Papa kila Duplex
ʻO ka wehewehe pōkole:
| Nā kikoʻī o 2304pāpaʻa: |
| Nā kikoʻī | ASTM A240 / ASME SA240 |
| Papa | 2304/S32304 |
| Laulā | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc. |
| Ka lōʻihi | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc. |
| mānoanoa | 0.1 mm a 100 mm |
| ʻenehana | Paʻa ʻōwili wela (HR), Pepa ʻōwili anu (CR)2B, 2D, BA NO(8), SATIN (Hui me ka uhi ʻia i ka palaki) |
| Hoʻopau ʻili | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, aniani, laina lauoho, pahū one, Brush, SATIN (Met with Plastic Coated) etc. |
| Mahele Raw | POSCO, Baosteel, TISCO, Saky Steel, Outokumpu |
| Puka | Pepa Maʻemaʻe, Papa, Papa, etc. |
| Hoʻopili i nā mea hoʻohana wiliwili | Hoʻohana ʻia ʻo 32760 duplex steel hoʻohanaER2594 uwea wiliwilia me E2594 koʻokoʻo wiliwili. |
| Nā Papa Kūlike ʻole S32304 Pāpaʻi Paʻi: |
| KANAWAI | WERKSTOFF NR. | UNS |
| 32304 | 1.4362 | S32304 |
| 32304 Nā Pepa, Nā Papa Hoʻohui Kemika a me nā waiwai Mechanical (saky steel): |
| Papa | C | Cr | Mn | Si | N | Mo | Cu | Ni |
| 32304 | 0.030 | 22.0-24.0 | 2.0 ka nui | 1.0 | 0.05-0.20 | 0.10-0.60 | 0.1-0.6max | 3.5-5.5 |
| ʻO ka mānoanoa | Lae hehee | Ikaika U'i | Ka ikaika o ka hua (0.2%offset) | Elongation (i loko o 2 in.) |
| 7.8g/cm3 | 1400-1450 ℃ | 620Mpa | 450Mpa | 25 % |
| No ke aha e koho ai iā mākou: |
1. Hiki iā ʻoe ke loaʻa ka mea kūpono e like me kāu koi ma ka liʻiliʻi loa o ke kumu kūʻai.
2. Hāʻawi pū mākou i nā Reworks, FOB, CFR, CIF, a me nā kumukūʻai hoʻopuka puka. Manaʻo mākou iā ʻoe e hana i ka hana no ka hoʻouna ʻana e ʻoi aku ka waiwai.
3. ʻO nā mea a mākou e hāʻawi nei ua hiki ke hōʻoia ʻia, mai ka palapala hōʻike maka a hiki i ka ʻōlelo kikoʻī hope loa. (E hōʻike ʻia nā hōʻike ma ke koi)
4. e hōʻoiaʻiʻo e hāʻawi i ka pane i loko o 24hours (maʻamau i ka hola hoʻokahi)
5. Hiki iā ʻoe ke kiʻi i nā mea kūʻai ʻokoʻa, nā hāʻawi wili me ka hōʻemi ʻana i ka manawa hana.
6. Hoʻolaʻa piha mākou i kā mākou mea kūʻai. Inā ʻaʻole hiki ke hoʻokō i kāu mau koi ma hope o ka nānā ʻana i nā koho āpau, ʻaʻole mākou e alakaʻi hewa iā ʻoe ma ka hana ʻana i nā ʻōlelo hoʻohiki wahaheʻe e hoʻokumu ai i nā pilina mea kūʻai aku.
| ʻO SAKY STEEL'S Quality Assurance (me nā mea luku a me ka non-destructive): |
1. Ho'āʻo ʻana i ke ana ʻike
2. Mechanical nānā 'ana e like me tensile, Elongation a me ka ho'ēmi 'āpana.
3. Ka nānā 'ana i ka hopena
4. Ka nānā 'ana i ka ho'ā'o kemika
5. Hoao paakiki
6. Ho'āʻo pale lua
7. Hoao Penetrant
8. Intergranular Corrosion Ho'āʻo
9. Ho'āʻo Roughness
10. Ho'āʻo hoʻokolohua Metallography
| ʻO SAKY STEEL'S Packaging: |
1. He mea koʻikoʻi ka hoʻopaʻa ʻana ma ka hihia o ka hoʻouna ʻana i ka honua kahi e hele ai ka lawe ʻana ma nā ala like ʻole e hiki ai i ka hopena hope loa, no laila ke kau nei mākou i ka hopohopo kūikawā e pili ana i ka ʻeke.
2. Hoʻopili ʻo Saky Steel i kā mākou waiwai ma nā ʻano he nui e pili ana i nā huahana. Hoʻopili mākou i kā mākou huahana ma nā ʻano he nui, e like me,
Nā kahua noi:
