H11 1.2343 Hot Work Tool Steel

Tlhaloso e Khutšoanyane:

1.2343 ke sehlopha se itseng sa tšepe ea tšepe, eo hangata e bitsoang H11 tšepe. Ke sesebelisoa sa tšepe se chesang se nang le thepa e ntle haholo bakeng sa lits'ebetso moo mocheso o phahameng o amehang, joalo ka ho forging, die casting, le extrusion process.


  • Botenya:6.0 ~ 50.0mm
  • Bophara:1200 ~ 5300mm, joalo-joalo
  • Kereiti:1.2343,H11
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    H11 1.2343 Hot Work Tool Steel:

    1.2343 tšepe e loketse maemo a mocheso o phahameng oa mocheso 'me e boloka ts'ebetso e tsitsitseng ka mocheso o phahameng, e leng ho etsang hore e sebelisoe ka ho pharaletseng ha ho etsoa le ho etsa hlobo.Tšepe ena e ka fetoloa bakeng sa ho thatafala le lisebelisoa tse ling tsa mechine ka mekhoa e nepahetseng ea phekolo ea mocheso ho finyella litlhoko tse khethehileng tsa kopo. 1.2343 tšepe hangata e na le khanyetso e ntle ea ho apara, e leng ea bohlokoa bakeng sa lits'ebetso tse atisang ho roala hlobo le lisebelisoa. Lisebelisoa tse tloaelehileng li kenyelletsa tlhahiso ea hlobo, hlobo e bolaeang, lisebelisoa tsa ho qhekella, lisebelisoa tse chesang, le lisebelisoa tse ling le likarolo tse sebetsang ka holimo. -mocheso le maemo a kgatello ya maikutlo.

    1.4313 X3CrNiMo13-4 Martensitic Stainless Steel

    Litlhaloso tsa H11 1.2343 Tool Steel:

    Kereiti 1.2343, H11,SKD6
    Standard ASTM A681
    Bokaholimo Batsho; E peeled; E bentšitsoeng; E entsoe ka mochini; Ho sila; E retelehile; Milled
    Botenya 6.0 ~ 50.0mm
    Bophara 1200 ~ 5300mm, joalo-joalo.
    Lintho tse tala POSCO, Baosteel, TISCO, Saky Steel, Outokumpu

    AISI H11 Tool Steel e lekanang le eona:

    Naha Japane Jeremane usa UK
    Standard JIS G4404 DIN EN ISO4957 ASTM A681 BS4659
    Kereiti SKD6 1.2343/X37CrMoV5-1 H11/T20811 BH11

    Sebopeho sa H11 Steel le Equivalents' Chemical:

    Kereiti C Mn P S Si Cr Ni Mo V
    4Cr5MoSiV1 0.33 ~ 0.43 0.20~0,50 ≤0.030 ≤0.030 0.80 ~ 1.20 4.75~5.50 1.40 ~ 1.80 1.10 ~ 1.60 0.30~0,60
    H11 0.33 ~ 0.43 0.20~0,60 ≤0.030 ≤0.030 0.80 ~ 1.20 4.75~5.50 - 1.10 ~ 1.60 0.30~0,60
    SKD6 0.32 ~ 0,42 ≤0.50 ≤0.030 ≤0.030 0.80 ~ 1.20 4.75~5.50 - 1.00 ~ 1.50 0.30~0,50
    1.2343 0.33 ~ 0.41 0.25~0,50 ≤0.030 ≤0.030 0.90 ~ 1.20 4.75~5.50 - 1.20 ~ 1.50 0.30~0,50

    Thepa ea tšepe ea SKD6:

    Thepa Metric Moemphera
    Botenya 7.81 g/cm3 0.282 lb/ka3
    Sebaka se qhibilihang 1427°C 2600°F

    Ke Hobane'ng ha U re Khetha?

    U ka fumana thepa e phethahetseng ho latela tlhoko ea hau bonyane theko e ka khonehang.
    Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.
    Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela. (Litlaleho li tla hlaha ho latela tlhoko)

    Re netefatsa hore re tla fana ka karabo nakong ea lihora tse 24 (hangata ka hora e tšoanang)
    Fana ka tlaleho ea SGS TUV.
    Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.
    Fana ka tšebeletso ea sebaka se le seng.

    Lisebelisoa tsa AISI H11 Tool Steel:

    AISI H11 tool steel, e tsejoang ka thepa ea eona e ikhethang ea mocheso le mochini, e fumana lisebelisoa tse fapaneng liindastering tse kang die casting, forging le extrusion. E sebelisoa haholo ha ho etsoa li-dies le lisebelisoa tse tlas'a mocheso o phahameng le khatello ea mochine, e bontšang ts'ebetso e phahameng ka ho fetisisa lits'ebetsong tse kang "die casting", "forging" le "plastic". Ka ho hanyetsa mocheso le ho apara, AISI H11 e boetse e sebelisoa ka lisebelisoa tse chesang tse chesang, lisebelisoa tsa ho itšeha, le mekhoa ea ho hlahisa lihlahisoa tsa aluminium le zinki, e bonts'a ho tšoaneleha ha eona bakeng sa likopo tse sa tšoaneng tse hlokang ho tšepahala le ho tšoarella libakeng tse phahameng tsa mocheso.

    Ho paka:

    1. Ho paka ke habohlokoa haholo-holo tabeng ea thepa ea machaba eo thepa e fetang ka litsela tse fapa-fapaneng ho fihla moo e eang teng, kahoo re amehile haholo ka ho paka.
    2. Saky Steel e paka thepa ea rona ka mekhoa e mengata ho latela lihlahisoa. Re paka lihlahisoa tsa rona ka mekhoa e mengata, joalo ka,

    1.2378 X220CrVMo12-2 Cold Work Tool Steel
    1.2378 X220CrVMo12-2 Cold Work Tool Steel
    Mold Steel P20 1.2311

  • E fetileng:
  • E 'ngoe:

  • Lihlahisoa tse Amanang