Alloy Steel F5 Sheets
Tlhaloso e Khutšoanyane:
| Litlhaloso tsa ASTM A182 F5 Alloy PATES / SHEETS: |
| Kereiti | ASTM A182 F5 |
| Standard | ASTM A182/ ASME SA182 |
| Botenya | Ho tloha ho 0.1 ho isa ho 100 mm |
| Boholo | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Qetella | Letlapa le chesang (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (E kopane le Plastic Coated) |
| Sebopeho | Lishiti, Lipoleiti, Likhoeli, Likhoeli tse Slatting, Likhoeli tse Perforated, Lifola, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Ho thatafala | Soft, Hard, Half Hard, Quarter Hard, Spring Hard jj. |
| Lisebelisoa | Likhamphani tse Chesang Oli ea Off-Shore, Phehlo ea Motlakase, Lik'hemik'hale, Phetoho ea Khase, Lik'hemik'hale tse Khethehileng, Meriana, Thepa ea Meriana, Lisebelisoa tsa Lik'hemik'hale, Lisebelisoa tsa Metsi a Leoatle, Lichelete tsa Mocheso, Li-Condensers, Indasteri ea Pulp le Pampiri. |
| LIKREITE TSE LING TSA ASTM A182 F5LIPELETE / SHEETES/COIL: |
| TS'ELISO | WERKSTOFF NR. | UNS |
| ASTM A182 F5 | - | K41545 |
| MOSEBETSI OA K'hemik'hale OAK41545LIPELETE / SHEETES/COIL: |
| Kereiti | C | Mn | Si | S | Cr | P | Mo |
| ASTM A182 F5 | 0.15 max | 0.3-0.6 max | 0.50 max | 0.03 max | 4.00 - 6.00 | 0.03 | 0.44-0.65 |
| Alloy Steel ASTM A182 F5 Sheet Mechanical Properties: |
| Kereiti | Tensile Strength (ksi) min | Elongation (% in 50mm) min | Matla a Kotulo 0.2% Bopaki (ksi) min | Ho thatafala |
| ASTM A182 F5 | 415 | 30% | 205 | - |
| Ke Hobane'ng ha U Re Khetha: |
1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e ka khonehang.
2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.
3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)
4. e tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)
5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.
6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.
| Ho paka: |
1. Ho paka ke habohlokoa haholo-holo tabeng ea thepa ea machaba eo thepa e fetang ka litsela tse fapa-fapaneng ho fihla moo e eang teng, kahoo re amehile haholo ka ho paka.
2. Saky steel's e paka thepa ea rona ka mekhoa e mengata ho latela lihlahisoa. Re paka lihlahisoa tsa rona ka mekhoa e mengata, joalo ka,
