AISI 4130 Plate ea tšepe

Tlhaloso e Khutšoanyane:

AISI 4130 Steel Plate Supplier, e fana ka lintlha tse qaqileng tsa sehlahisoa ho kenyelletsa sebopeho, thepa le lits'ebetso. Therisano ea litsebi le tšebeletso ea boleng ho u fa tharollo e molemohali.


  • Boholo:0.020″~2.00″
  • Bokaholimo:Brush, etching, joalo-joalo
  • Qetella:Letlapa le chesang (HR), Cold rolled sheet (CR)
  • Foromo:Likhoele, li-foil, li-roll, Leqephe le Plain
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    4130 Alloy Steel Plate:

    AISI 4130 tšepe poleiti ke tšepe e tlase ea alloy ea sehlopha sa tšepe ea chromium-molybdenum. E na le matla a phahameng, ho tiea ho hoholo le ho chesehela 'me e sebelisoa haholo liindastering tse kang sefofane, tlhahiso ea likoloi le kaho. Letlapa la tšepe la AISI 4130 le fetohile thepa ea khetho libakeng tse ngata tsa indasteri ka lebaka la matla a eona a babatsehang, boima le machinability. Mefuta e mengata ea lisebelisoa le litlhaloso tse ngata li e nolofalletsa ho finyella litlhoko tse fapaneng tsa boenjiniere. Haeba o hloka lisebelisoa tsa tšepe tsa boleng bo holimo le tse tšepahalang, poleiti ea tšepe ea AISI 4130 ke khetho e nepahetseng.

    Plate ea tšepe ea 4130 e tšoarellang

    Litlhaloso tsa Leqephe la tšepe la 4130:

    Kereiti 4130,4340
    Standard ASTM A829/A829M
    Bophara & Bolelele 18" x 72" kapa 36" x 72"
    Qetella Letlapa le chesang (HR), Cold rolled sheet (CR)
    Setifikeiti sa Tlhahlobo ea Mill EN 10204 3.1 kapa EN 10204 3.2
    Lintho tse tala POSCO, Baosteel, TISCO, Saky Steel, Outokumpu

    Sebopeho sa AISI 4130 Steel Plate Chemical:

    C Si Mn P S Cr Mo Ni Fe
    0.28-0.33 0.20-0,35 0.40-0,60 0.035 0.040 0.8-1.10 0.15-0,25 0.10 Rem

    4130 Steel Mechanical Properties:

    Tensile Matla (MPa) Kotulo Matla Elongation Brinell hardness (HBW)
    560 - 760 MPa 460 MPa 20% 156 - 217 HB

    AISI 4130 Heat Treatments:

    Mekhoa e tloaelehileng ea kalafo ea mocheso bakeng sa lipoleiti tsa tšepe tsa AISI 4130 li kenyelletsa:
    1. Ho tlatsa:
    Mocheso: 830°C (1525°F)
    Tshebetso: Ho pholile butle ho ea mocheso oa kamore, hangata ho etsoa ka sebōping.
    2. Ho tloaeleha:
    Mocheso: 900°C (1650°F)
    Mokhoa: Ho pholisa moea.
    3. Ho tima le ho halefisa:
    Mocheso oa ho tima: 860°C (1575°F)
    Mocheso oa mocheso: 400 - 650 ° C (750 - 1200 ° F), ho itšetlehile ka boima bo batlang.

    Setifikeiti sa Plate ea tšepe ea 4130:

    Ho latela maemo a GB/T 3077-2015.

    4140 MTC

    Teko ea 4130 Steel Plate UT le Hardness:

    Tlhahlobo ea UT

    Tlhahlobo ea UT

    Teko ea boima

    Teko ea boima

    4140
    4140 tlaleho ea tlhahlobo
    Tlaleho ea tlhahlobo ea 4140 plate

    Setšoantšo sa AISI 4130:

    1.Matla a phahameng: a khona ho mamella meroalo e phahameng le khatello ea maikutlo.
    2.Bothata bo botle: ha ho bonolo ho senya tlas'a khatello e phahameng ea maikutlo le tšusumetso.
    3.Good weldability: ho bonolo ho sebetsa le ho cheselletsa, e loketseng mekhoa e sa tšoaneng ea tlhahiso.
    4.Ho hanyetsa: ho boloka ts'ebetso e ntle sebakeng se phahameng sa ho apara.
    5.Corrosion resistance: e hanela ho bola ho isa tekanyong e itseng mme e lelefatsa bophelo ba tšebeletso.

    Ke Hobane'ng ha U re Khetha?

    U ka fumana thepa e phethahetseng ho latela tlhoko ea hau bonyane theko e ka khonehang.
    Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.
    Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela. (Litlaleho li tla hlaha ho latela tlhoko)

    Re netefatsa hore re tla fana ka karabo nakong ea lihora tse 24 (hangata ka hora e tšoanang)
    Fana ka tlaleho ea SGS TUV.
    Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.
    Fana ka tšebeletso ea sebaka se le seng.

    Litšebeletso tsa Rōna

    1. Ho khutsisa le ho khutsisa

    2.Ho phekola mocheso oa vacuum

    3.Bokaholimo bo pentiloeng ka seipone

    4.Precision-milled finish

    4.CNC mechine

    5.Ho cheka ka mokhoa o nepahetseng

    6.Khaola likarolo tse nyane

    7.Fihlella ho nepahala ha hlobo

    4130 Alloy Steel Plate Packing:

    1. Ho paka ke habohlokoa haholo-holo tabeng ea thepa ea machaba eo thepa e fetang ka litsela tse fapa-fapaneng ho fihla moo e eang teng, kahoo re amehile haholo ka ho paka.
    2. Saky Steel e paka thepa ea rona ka mekhoa e mengata ho latela lihlahisoa. Re paka lihlahisoa tsa rona ka mekhoa e mengata, joalo ka,

    AISI 4130 Steel Plate bafani ba thepa
    AISI 4130 Steel Plate theko
    AISI 4130 Steel Plate e rekisoang

  • E fetileng:
  • E 'ngoe:

  • Lihlahisoa tse Amanang