ER308 igwe anaghị agba nchara
Nkọwa dị mkpirikpi:
Ọkọlọtọ: GB, SUS, AWS, JIS, DIN, BS970
Dayameta: 0.08-8mm
| Waya ịgbado ọkụ ndị ọzọ: |
| igwe anaghị agba nchara Tig | |||||||||||
| Ụdị | (mm) Dayameta | Gas na-echebe | Ngwakọta kemịkalụ nke ọla edobere (%) | ||||||||
| C | Si | Mn | P | S | Cr | Ni | Mo | Cu | |||
| ER308 | 0.6-4.0 | Ar+0.5-2% CO2 | 0.08 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 19.5-22.0 | 9.0-11.0 | 0.75 | 0.75 |
| ER308L | 0.6-4.0 | Ar+0.5-2% CO2 | 0.03 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 19.5-22.0 | 9.0-11.0 | 0.75 | 0.75 |
| ER308LSI | 0.6-4.0 | Ar+0.5-2% CO2 | 0.03 | 0.65-1.0 | 1.0-2.5 | 0.03 | 0.03 | 19.5-22.0 | 9.0-11.0 | 0.75 | 0.75 |
| ER309 | 0.6-4.0 | Ar+0.5-2% CO2 | 0.12 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 23.0-25.0 | 12.0-14.0 | 0.75 | 0.75 |
| ER309L | 0.6-4.0 | Ar+0.5-2% CO2 | 0.03 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 23.0-25.0 | 12.0-14.0 | 0.75 | 0.75 |
| ER310 | 0.6-4.0 | Ar+0.5-2% CO2 | 0.08-0.15 | 03-0.65 | 1.0-2.5 | 0.03 | 0.03 | 25.0-28.0 | 20.0-22.5 | 0.75 | 0.75 |
| ER312 | 0.6-4.0 | Ar+0.5-2% CO2 | 0.15 | 0.3-0.62 | 1.0-2.5 | 0.03 | 0.03 | 28.0-32.0 | 8.0-10.5 | 0.75 | 0.75 |
| ER316 | 0.6-4.0 | Ar+0.5-2% CO2 | 0.08 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 18.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.75 |
| ER316L | 0.6-4.0 | Ar+0.5-2% CO2 | 0.03 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 18.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.75 |
| ER316LSI | 0.6-4.0 | Ar+0.5-2% CO2 | 0.03 | 0.65-1.0 | 1.0-2.5 | 0.03 | 0.03 | 18.0-20.0 | 11.4-14.0 | 2.0-3.0 | 0.75 |
| ER410 | 0.6-4.0 | Ar+0.5-2% CO2 | 0.12 | 0.5 | 0.6 | 0.03 | 0.03 | 11.5-13.5 | 0.6 | 0.75 | 0.75 |
| ER430 | 0.6-4.0 | Ar+0.5-2% CO2 | 0.1 | 0.5 | 0.6 | 0.03 | 0.03 | 15.5-17.0 | 0.6 | 0.75 | 0.75 |
| Ngwakọta kemịkalụ nke ọla edobere: |
| C | Si | Mn | Cr | Ni | S | P | Mo | Cu |
| 0.08 | 0.30-0.65 | 1.00-2.50 | 19.00-22.00 | 9.0-11.0 | 0.03 | 0.03 | 0.75 | 0.75 |
| Ihe eji arụ ọrụ nke ọla edobere: |
| Ike ọdụdọ | Specific elongation |
| MPa | % |
| 570-610 | 36-42 |
| Igwe anaghị agba ncharaịgbado ọkụtig: |
(1) MIG / MAG akpaka igwe anaghị agba nchara waya
1) 1kg kwa spool: D100 n'èzí dayameta bụ 100mm, n'ime dayameta nke spool oghere bụ 15mm, elu bụ 38mm
2) 5kg kwa spool: D200 n'èzí dayameta bụ 200mm, n'ime dayameta nke spool oghere bụ 54mm, elu bụ 45mm
3) 12.5kg kwa spool na 15kg kwa spool: D300 n'èzí dayameta bụ 300mm, n'ime dayameta nke spool oghere bụ 52mm, elu bụ 90mm
(2) TIG igwe anaghị agba nchara waya
ịkpụ ogologo 1000mm, mbukota n'ime bụ 5kg kwa akpa rọba, mbukota n'èzí bụ ikpe osisi. (ịkwakọba na drum, 1m / line, 5kg / drum, 10kg / drum). Nha spool na drum niile dị.
Hot Tags: igwe anaghị agba nchara welding tig emepụta, suppliers, price, for sale
| Ihe kpatara ịhọrọ anyị: |
1. Ị nwere ike nweta ihe zuru oke dịka ihe ị chọrọ na ọ dịkarịa ala ọnụahịa.
2. Anyị na-enyekwa Reworks, FOB, CFR, CIF, na ọnụ ụzọ nnyefe ọnụ ụzọ. Anyị na-atụ aro ka ịme azụmahịa maka mbupu nke ga-adị oke ọnụ ahịa.
3. Ihe anyị na-enye bụ nkwenye kpamkpam, site na akwụkwọ nyocha nke akụrụngwa ruo na nkwupụta akụkụ ikpeazụ. (Akụkọ ga-egosi na achọrọ)
4. Anyị na-ekwe nkwa inye nzaghachi n'ime 24hours (na-emekarị n'otu awa)
5. Ị nwere ike nweta ngwaahịa ọzọ, igwe ihe nnyefe na ibelata n'ichepụta oge.
6. Anyị raara onwe anyị nye ndị ahịa anyị kpamkpam. Ọ bụrụ na ọ gaghị ekwe omume imezu ihe ị chọrọ mgbe ị nyochachara nhọrọ niile, anyị agaghị eduhie gị site n'ịkwe nkwa ụgha nke ga-eme ka ndị ahịa nwee mmekọrịta dị mma.
| Nkwenye ịdịmma nke SAKY STEEL (gụnyere ma nke na-emebi emebi na nke anaghị emebi emebi): |
1. Nleba anya akụkụ
2. Mechanical nyochaa dị ka tensile, elongation na mbenata nke ebe.
3. Mmetụta mmetụta
4. Nyocha nyocha nke kemịkalụ
5. Nnwale ike ike
6. Nnwale nchedo pitting
7. Nnwale penetrant
8. Nnwale corrosion intergranular
9. Nnwale siri ike
10. Metallography nnwale nnwale
