I-ER385 Stainless Steel Welding Rod
Incazelo emfushane:
I-ER385 iwuhlobo lwensimbi yokugcwalisa i-welding, ikakhulukazi i-electrode yensimbi engagqwali. I-“ER” imele “i-Electrode noma i-Rod,” kanti i-“385″ ikhombisa ukwakheka kwamakhemikhali nezici zensimbi yokugcwalisa. Kulokhu, i-ER385 yakhelwe ukushisela izinsimbi ezingenasici ze-austenitic.
I-ER385 Welding Rod:
Izinsimbi ezingenasici ze-Austenitic, ezifana Nohlobo 904L, ziqukethe amazinga aphezulu e-chromium, i-nickel, ne-molybdenum, okuzenza zimelane nokugqwala futhi zilungele ukusetshenziswa ezindaweni ezinokhahlo. Izinduku zokushisela ze-ER385 zivame ukusetshenziswa lapho ukuvikela ukugqwala kuyisici esibalulekile, njengasezimbonini zamakhemikhali, ze-petrochemical, nezasolwandle.Izinduku zokushisela ze-ER385 zilungele izinqubo zokushisela ezihlukahlukene, okuhlanganisa i-shielded metal arc welding (SMAW), i-gas tungsten arc. ukushisela (i-GTAW noma i-TIG), kanye ne-gas metal arc welding (GMAW noma i-MIG).
Imininingwane Ye-ER385 Welding Wire:
| Ibanga | ER304 ER308L ER309L,ER385 njll. |
| Okujwayelekile | AWS A5.9 |
| Ubuso | Kuyagqama, Kuguqubele, Kuthafeni, Kumnyama |
| Ububanzi | I-MIG – 0.8 kuya ku-1.6 mm,TIG – 1 kuya ku-5.5 mm,Intambo ewumgogodla – 1.6 kuye ku-6.0 |
| Isicelo | Ivame ukusetshenziswa ekukhiqizeni nasekulungiseni imibhoshongo, amathangi, amapayipi kanye neziqukathi zokugcina nezokuthutha zama-asidi aqinile ahlukahlukene. |
Ilingana ne-Stainless Steel ER385 Wire:
| IZINGA | I-WERKSTOFF NR. | I-UNS | I-JIS | BS | KS | AFNOR | EN |
| ER-385 | 1.4539 | N08904 | I-SUS 904L | 904S13 | I-STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
I-Chemical Composition SUS 904L Wire Welding:
Ngokusho kwe-AWS A5.9 ejwayelekile
| Ibanga | C | Mn | P | S | Si | Cr | Ni | Mo | Cu |
| I-ER385(904L) | 0.025 | 1.0-2.5 | 0.02 | 0.03 | 0.5 | 19.5-21.5 | 24.0-36.0 | 4.2-5.2 | 1.2-2.0 |
1.4539 Welding Rod Mechanical izakhiwo:
| Ibanga | I-Tensile Strength ksi[MPa] | Elongation % |
| ER385 | 75[520] | 30 |
Kungani Khetha thina?
•Ungathola impahla ephelele ngokuvumelana nemfuneko yakho okungenani intengo engenzeka.
•Siphinde sinikeze ama-Reworks, i-FOB, i-CFR, i-CIF, nezintengo zokulethwa kwendlu ngendlu. Siphakamisa ukuthi wenze isivumelwano sokuthunyelwa okuzokonga kakhulu.
•Izinto esizihlinzekayo zingaqinisekiswa ngokuphelele, kusukela kusitifiketi sokuhlolwa kwempahla engavuthiwe kuya esitatimendeni sobukhulu bokugcina. (Imibiko izovela ngokwemfuneko)
•Siqinisekisa ukunikeza impendulo phakathi namahora angu-24 (imvamisa ngehora elifanayo)
•Nikeza umbiko we-SGS TUV.
•Sizinikele ngokugcwele kumakhasimende ethu. Uma kungeke kwenzeke ukuhlangabezana nezidingo zakho ngemva kokuhlola zonke izinketho, ngeke sikudukise ngokwenza izithembiso ezingamanga ezizodala ubudlelwano obuhle namakhasimende.
•Nikeza isevisi yokuma okukodwa.
Imingcele yamanje yokushisela: DCEP (DC+)
| Ukucaciswa kobubanzi bentambo (mm) | 1.2 | 1.6 |
| Amandla kagesi (V) | 22-34 | 25-38 |
| Okwamanje (A) | 120-260 | 200-300 |
| Ubude bomile (mm) | 15-20 | 18-25 |
| Ukugeleza kwegesi | 20-25 | 20-25 |
Yiziphi izici ze-ER385 Welding Wire?
1. Ukumelana nokugqwala okuhle kakhulu, kungamelana nokugqwala okufanayo kwe-sulfuric acid ne-phosphoric acid, ukumelana nokugqwala kwe-acetic acid kunoma yiliphi izinga lokushisa nokugxila ngaphansi kwengcindezi evamile, futhi kungaxazulula ngempumelelo ukugqwala kwe-pitting, ukugqwala kwe-pitting, ukugqwala kwe-crevice, ukugqwala kwengcindezi nezinye izinkinga halide.
2. I-arc ithambile futhi izinzile, ine-spatter encane, umumo omuhle, ukususwa kwe-slag okuhle, ukondla ngocingo okuzinzile, nokusebenza okuhle kakhulu kwenqubo yokushisela.
Izikhundla zokushisela nezinto ezibalulekile:
1. Sebenzisa izinto ezivimbela umoya lapho ushisela ezindaweni ezinomoya ukuze ugweme imigodi ebangelwa umoya onamandla.
2. Izinga lokushisa phakathi kwamaphasi lilawulwa ku-16-100℃.
3. Umswakama, amabala okugqwala namabala kawoyela ebusweni bensimbi eyisisekelo kufanele kususwe ngokugcwele ngaphambi kokushisela.
4. Sebenzisa igesi ye-CO2 yokushisela, ubumsulwa kufanele bube ngaphezu kuka-99.8%, futhi ukugeleza kwegesi kufanele kulawulwe ku-20-25L/min.
5. Ubude bokwelulwa okomile kocingo lokushisela kufanele bulawuleke phakathi kwebanga lika-15-25mm.
6. Ngemva kokukhipha ucingo lokushisela, sicela uqaphele: thatha izinyathelo zokuvikela umswakama, uyisebenzise ngokushesha ngangokunokwenzeka, futhi ungashiyi ucingo lwe-welding olungasetshenzisiwe luvezwe emoyeni isikhathi eside.
Amakhasimende ethu
Ukupakisha kwe-Stainless Steel I Beams:
1. Ukupakisha kubaluleke kakhulu ikakhulukazi endabeni yokuthunyelwa kwamanye amazwe lapho impahla idlula eziteshini ezihlukahlukene ukuze ifike lapho kuyiwa khona, ngakho sibeka ukukhathazeka okukhethekile mayelana nokupakisha.
2. I-Saky Steel ipakisha izimpahla zethu ngezindlela eziningi ngokusekelwe emikhiqizweni. Sipakisha imikhiqizo yethu ngezindlela eziningi, njengokuthi,
