I-303 Bar yentsimbi engenasinqe
Inkcazo emfutshane:
I-Sakysteel yileIbar engenaloUmenzi kunye nabathengisi eChina, abakhethekileyo kuphando, uphuhliso kunye nemveliso ye-303 yentsimbi yentsimbi.
| C% | I-7% | Mn% | P% | S% | Cr% | I-NI% | N% | Mo% | Ti% |
| <0.15 | <1.0 | <2.0 | <0.20 | <0.15 | 17.0-19.0 | 8.0-10.0 | - | - | - |
| Ukucaciswa kwe-303 yentsimbi yentsimbi yentsimbi: |
| Umgangatho | I-A276, i-A484, A479, i-A582, i-GIs G4311, i-josi 16440, dingo D3706, GB / T 1220 |
| Izixhobo | 201,202,205, XM-19 njl njl. 301,303,304.304l, 304h, 309s, 314,31.313,321,348 njl. 409,410,416,420,430,430f, 431,440 2205,2507, S31803,2209,630,631,15,121,15,15,174,25,2531 |
| Umphezulu | Ethathwayo, ethanjiswe, emnyama, bukhali sentlabathi, eqaqambileyo, mill, isipili, njl njl njl |
| Itekhnoloji | Ishushu eshushu, i-welded, igobe |
| Inkcazo | I-20 * 3mm -100 * 10mm okanye njengoko kufuneka |
| Ukunyamezelana | + -2% |
| I-316 yeemveliso zentsimbi ezingenasinqena zivela kwi-sakysteel: |
 I-bar yensimbi yentsimbi engenalo |  Isampulu_logo ekunene |
| Ukusetyenziswa kwe-303 yentsimbi yentsimbi yentsimbi |
I-1.Sunteristic: I-cutlery, i-swinks, i-saucepans, imigqomo yokuhlamba, i-microwave ivule i-liners, i-razor blades
I-2.Transdourt: Inkqubo yokuphelisa, i-carim / grillers, iitanki zendlela, izikhongozeli zenqanawa, inqanawa yekhephu
3.Oigeli kunye negesi: Indawo yokuhlala yendawo yokuhlala, i-carys trays
4.Umenzele: izixhobo zotyando, ukufakwa kwetyala, iskena seMRI.
5.Od kunye nesiselo: Izixhobo zokutya, ukuveliswa, ukungqinelana, ukuqhubekeka kokutya
6.Water: Unyango lwamanzi kunye nonyango lwamanzi, ityhubhu yamanzi, iitanki zamanzi ashushu
7.General: I-SPRINGS, ASTENTER (BOLTS, ADWASIHER), ucingo
8.UCHICAL / Phawula: Iinqanawa zoxinzelelo
I-Wints, Ukuvalelwa, i-Handores, ifanitshala yesitrato, eyenziwayo, iikholamu, i-lintes, i-lintes, i-inki eZiyo
| Ukuqulunqwa kwekhemikhali ye-Stainerd Bar Bar: |
| I-austedite Intsimbi engenasipho | 329j1 | I-0CR26NI5Mo2 | <0.08 | 23.00.00 | 3.00-6.00 | <1.50 | <0.035 | <0.030 | 1.00-3.00 | <1.00 | - | 2) |
| I-1CR18NI11SI4SI4ALTI | I-0.10-0.18 | 17.50-19.50 | 10.-i-120 .. | <0.80 | <0.035 | <0.030 | - | 3.40-4.00 | - | I-al 0.10-0.30; I-TI 0.40-0.70 | ||
| 00c18NI5MOSI2 | <0.030 | 18.00-19.50 | 4.50-5.50 | 1.00-2.00 | <0.035 | <0.030 | 2.50-3.00 | 1.30-2.00 | - | - | ||
| Intsimbi engenasipho | 405 | I-0ccr13al | <0.08 | 11.50.50 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | I-al 0.10-0.30 |
| I-410l | 00c12 | <0.030 | 11.00-13.00 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
| I-430 | I-1CR17 | <0.12 | 16.00-18.00 | 3) | <1.25 | <0.035 | <0.030 | - | <0.75 | - | - | |
| I-430f | Y1CR17 | <0.12 | 16.00-18.00 | 3) | <1.00 | <0.035 | <0.15 | 1) | <1.00 | - | - | |
| 434 | I-1CR17mo | <0.12 | 16.00-18.00 | 3) | <1.00 | <0.035 | <0.030 | I-0.75-125 | <1.00 | - | - | |
| 447J1 | 00cr30mo2 | <0.010 | 28.50-32.00 | - | <0.440 | <0.035 | <0.030 | 1.50-2.50 | <0.440 | <0.015 | - | |
| Xm27 | 00c27mo | <0.010 | 25.00-27.50 | - | <0.440 | <0.035 | <0.030 | 0.75-1.50 | <0.440 | <0.015 | - |
| Intsimbi engenalo | 403 | I-1CR12 | <0.15 | 11.50.00 | 3) | <1.00 | <0.035 | <0.030 | - | <0.50 | - | - |
| I-410 | I-1CR13 | <0.15 | 11.50.50 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
| 405 | I-SCR13 | <0.08 | 11.50.50 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
| 416 | Y1cr13 | <0.15 | 12.00-14.00 | 3) | <1.25 | <0.035 | <0.15 | 1) | <1.00 | - | - | |
| 410J1 | I-1CR13mo | <0.08-0.18 | 11.50.00 | 3) | <1.00 | <0.035 | <0.030 | 0.30-0.60 | <0.60 | - | - | |
| 420J1 | I-2CR13 | I-0.16-0.25 | 12.00-14.00 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
| 420J2 | I-3CR13 | I-0.26-0.35 | 12.00-14.00 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
| 420f | Y3CR13 | I-0.26-0.40 | 12.00-14.00 | 3) | <1.25 | <0.035 | <0.15 | 1) | <1.00 | - | - | |
| I-3CR13mo | I-0.28-0.35 | 12.00-14.00 | 3) | <1.00 | <0.035 | <0.030 | I-0.50-1.00 | <0.80 | - | - | ||
| I-4CR13 | 0.36-0.45 | 12.00-14.00 |
