SUS hairline brush 310 Stainless Steel Round Bar
Short Description:
Saky Steel’s 310 stainless steel bar, also known as UNS S31000 and Grade 310, contains the following primary elements: .25% maximum carbon, 2% maximum manganese, 1.5% maximum silicon, 24% to 26% chromium, 19% to 22% nickel, traces of sulfur and phosphorus, with the balance being iron. Saky Steel’s Type 310 is superior in most environments to 304 or 309 due to its relatively high chromium and nickel content. It exhibits a combination of good strength and corrosion resistance in temperatures up to 2100° F. Cold working will cause 309 to increase in hardness and strength, and it does not respond to heat treatment.
| Specifications of stainless steel bar: |
Specifications : ASTM A276, ASTM A314
Grade: 310 310S, 310, 310s, 316
Length :5.8M,6M & Required Length
Round Bar Diameter : 4.00 mm to 500 mm
Bright Bar : 4mm – 450mm,
Condition : Cold Drawn & Polished Cold Drawn, Peeled & Forged
Surface Finish : Black, Bright, Polished, Rough Turned, NO.4 Finish, Matt Finish
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forged Etc.
End : Plain End, Beveled End
| 310 310s Stainless Steel Bar Chemical Composition: |
| Grade | C | Mn | Si | P | S | Cr | Ni |
| 310 | 0.25 max | 2.0 max | 1.5 max | 0.045 max | 0.030 max | 24.0 – 26.0 | 19.0- 22.0 |
| 310S | 0.08 max | 2.0 max | 1.5 max | 0.045 max | 0.030 max | 24.0 – 26.0 | 19.0- 22.0 |
| 310 310s Stainless Steel Bar MECHANICAL & PHYSICAL PROPERTIES: |
| Tensile Strength (min) | MPa – 620 |
| Yield Strength (0.2%Offset) | MPa – 310 |
| Elongation | 30 % |
| Why Choose Us : |
1. You can get the perfect material according to your requirement at the least possible price.
2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. e guarantee to give a response within 24hours(usually in the same hour)
5. You can get stock alternatives, mill deliveries with minimizing manufacturing time.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
| SAKY STEEL’S Quality Assurance (including both Destructive and Non-Destructive) : |
1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Impact analysis
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Roughness Testing
10. Metallography Experimental Test
| SAKY STEEL’S Packaging: |
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Saky Steel’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
Application:
Furnace parts
Heat Exchangers
Paper Mill Equipment
Exhaust Parts in Gas Turbines
Jet Engine Parts
Oil Refinery Equipment
