303 Baja datar datar bar
Katerangan pondok:
Sakysteel nyaétaDatar datar barProduksi sareng panyerehan di Cina, khusus dina panalungtikan, produksi sareng produksi 303 datar datar datar datar.
| C% | Si% | Mn% | P% | S% | Coba | Ni | N% | Mo% | Ti% |
| <0.15 | <1.0 | <2.0 | <0.20 | <0.15 | 17.0-19.0 | 8.0-10.0 | - | - | - |
| Spésifikasi 303 Baja datar datar |
| Standar | Asst A276, A484, A479, A580, A582, J582, JIG G4 g410, PS DPAT / T 1224, PS 1220, PS 1220 |
| Material | Taun 201.20,20,5, XM-19 jsb. 301,30,304,304L, 304H, 309-an, 3110, 314,316L, 316TI, 3121 kaét, 3148,330,330,331,330 409,410,416,420,430,430f, 431,440 220,5,2507, S31803,2209,630,632,13d, 17-4p, 90-20L, F51,257, F51,257, F51,257, F51,357, F51,357 |
| Beungeuteun | Pempit, dikupas, hideung, blast, terang, ngagiling, eunteung, rambut etc |
| Téknologi | Hot dipredis, dilas, bengkok |
| Spésifikasi | 20 * 3mm -100 * 10mm atanapi sakumaha diperyogikeun |
| Kasabaran | + -2% |
| 316 Stainless Staves bar datar datar tina Sakysteel: |
 baja datar stainless bar datar |  Severch_logo leres |
| Aplikasi 303 Bar datar bar datar |
1.dorestic: Canlery, Persih, Padeppans, ngumbah Grangking Mesin, Grindave Offers, Bitud
2.Transourt: Sistem Leungit, Carungan Mobil / Grilles, Tankbers Bound, wadah kapal, kapal terbang
3. Kilil sareng gas: Doklate platform, kabel baki
4.masi: Alat bedah, implants bedah, scan phi.
5.Food sareng inuman: Persasing alat, Brewing, sulingan, ngolah pangan
6. Water: Perawatan cai sareng pembuangan cai, tabung cai, tangki cai panas
7.Genedia: Springs, pengikat (Bolts, nut sareng
8.Chemical / farmasiis: kapal tekanan, prosés pipa
9.arkhitéktur / Utang Téknik Kensi: sela, serangga, panto sareng jandela fitsang, perkanti wates, liang lampu dangungan
| Komposisi kimia tina bar datar stel datar: |
| Austenite Baja ferrite stainless | 329j1 | 0cr26ni5mo2 | <0,08 | 23.00-28.00 | 3.00-6.00 | <1,50 | <0,035 | <0,030 | 1.00-3.00 | <1.00 | - | 2) |
| 1cr18ni111sori4ali | 0,10-0.18 | 17.50-19.50 | 10.-120 .. | <0,80 | <0,035 | <0,030 | - | 3.40-4.00 | - | Al 010-0.30; Ti 0,40-0.70 | ||
| 00cr18ni5MOSI2 | <0,030 | 18.00-19.50 | 4.50-5.50 | 1.00-2.00 | <0,035 | <0,030 | 2.50-3.00 | 1.30-2.00 | - | - | ||
| Baja ferrite stainless | Z5 | 0cr13al | <0,08 | 11.50-14.50 | 3) | <1.00 | <0,035 | <0,030 | - | <1.00 | - | Al 0.10-0.30 |
| 410L | 00cr12 | <0,030 | 11.00-13.00 | 3) | <1.00 | <0,035 | <0,030 | - | <1.00 | - | - | |
| 430 | 1cr17 | <0.12 | 16.00-18.00 | 3) | <1.25 | <0,035 | <0,030 | - | <0,75 | - | - | |
| 430f | Y1cr17 | <0.12 | 16.00-18.00 | 3) | <1.00 | <0,035 | <0.15 | 1) | <1.00 | - | - | |
| 434 | 1cr17mo | <0.12 | 16.00-18.00 | 3) | <1.00 | <0,035 | <0,030 | 0.75-1.25 | <1.00 | - | - | |
| 447j1 | 00cr0mo2 | <0,010 | 28.5-32.00 | - | <0,40 | <0,035 | <0,030 | 1.50-2.50 | <0,40 | <0,015 | - | |
| XM27 | 00cr27mo | <0,010 | 25.00-27.50 | - | <0,40 | <0,035 | <0,030 | 0.75-1.50 | <0,40 | <0,015 | - |
| Martensite Steeless Steel | 403 | 1cr12 | <0.15 | 11.50-13.00 | 3) | <1.00 | <0,035 | <0,030 | - | <0,50 | - | - |
| 410 | 1cr13 | <0.15 | 11.50-13.50 | 3) | <1.00 | <0,035 | <0,030 | - | <1.00 | - | - | |
| Z5 | 0cr13 | <0,08 | 11.50-13.50 | 3) | <1.00 | <0,035 | <0,030 | - | <1.00 | - | - | |
| 416 | Y1cr13 | <0.15 | 12.00-14.00 | 3) | <1.25 | <0,035 | <0.15 | 1) | <1.00 | - | - | |
| 410j1 | 1cr13mo | <0,08-0.18 | 11.50-14.00 | 3) | <1.00 | <0,035 | <0,030 | 0.30-0.60 | <0.60 | - | - | |
| 420j1 | 2CR13 | 0.16-0.25 | 12.00-14.00 | 3) | <1.00 | <0,035 | <0,030 | - | <1.00 | - | - | |
| 420j2 | 3cr13 | 0.26-0.35 | 12.00-14.00 | 3) | <1.00 | <0,035 | <0,030 | - | <1.00 | - | - | |
| 420f | Y3cr13 | 0.26-0.40 | 12.00-14.00 | 3) | <1.25 | <0,035 | <0.15 | 1) | <1.00 | - | - | |
| 3cr13mo | 0.28-0.35 | 12.00-14.00 | 3) | <1.00 | <0,035 | <0,030 | 0.50-1.00 | <0,80 | - | - | ||
| 4k13 | 0.36-0.45 | 12.00-14.00 |
