DIN 1.2714 L6 Mold Steel
Tlhaloso e Khutšoanyane:
1.2714 ke mofuta oa tšepe ea tšepe ea alloy, e tsejoang hape e le tšepe ea L6. E khetholloa ka ho thatafala ha eona, ho thatafala ho phahameng, le ho hanyetsa ho apara hantle, ho etsa hore e tšoanelehe bakeng sa likopo tse fapa-fapaneng tsa ho etsa lihlahisoa tsa forging dies, die-casting die, le lisebelisoa tse ling tse tlas'a tšusumetso e matla le ho apara.
DIN 1.2714 L6 Mold Steel:
Lisebelisoa tsa tšepe tse entsoeng ho tloha ho 1.2714 alloy hangata li fanoa ka boemo ba annealed, e leng se lumellang ho etsa mechine e bonolo le phekolo ea mocheso e latelang. Li ka phekoloa ka mocheso ho finyella boima bo lakatsehang le maemo a thata a loketseng bakeng sa kopo e reretsoeng.Joaloka lisebelisoa tse ling tsa lisebelisoa, tšepe ea 1.2714 e hloka phekolo e nepahetseng ea mocheso ho eketsa ts'ebetso ea eona. Sena se ka 'na sa kenyelletsa mekhoa e kang ho koala, ho tima, le ho futhumatsa, ho itšetlehile ka thepa e lakatsehang.Tšepe ena hangata e na le likarolo tse kang chromium, nickel, le molybdenum, tse tlatsetsang ho sebetsa ha eona. Lebitso "1.2714" ke khoutu ea linomoro e sebelisetsoang ho khetholla sebopeho le thepa e khethehileng ea tšepe.
Litlhaloso tsa DIN 1.2714 Mold Steel:
| Kereiti | 5CrNiMo (T20103) ，L6 (T61206)，SKT4，55NiCrMoV7 (1.2714)，55NiCrMoV7 |
| Standard | GB/T 1299-2000，ASTM A681-08，JIS G4404-2006，EN ISO 4957-1999 |
| Bokaholimo | E Ntšo, E Khōlō, E Fetohile |
| Bolelele | 1 ho isa ho 6 Limithara |
| Ho sebetsa | Cold Drawn & polished Cold Drawn, Centreless Ground & polished |
| Lintho tse tala | POSCO, Baosteel, TISCO, Saky Steel, Outokumpu |
L6 Mold Steel e lekanang:
| Standard | GB/T 1299-2000 | ASTM A681-08 | JIS G4404-2006 | EN ISO 4957-1999 | ISO 4957:1999 |
| Kereiti | 5CrNiMo (T20103) | L6 (T61206) | SKT4 | 55NiCrMoV7 (1.2714) | 55NiCrMoV7 |
Sebopeho sa Lik'hemik'hale Tsa L6 Tools litšepe tsa tšepe:
| EMELANG | Kereiti | C | Mn | P | S | Cr | Mo | Ni | V | Si |
| GB/T 1299-2000 | 5CrNiMo (T20103) | 0.50-0,60 | 0.50-0,80 | 0.030 | 0.030 | 0.50-0,80 | 0.15-0.30 | 1.40-1,80 | 0.40 | |
| ASTM A681-08 | L6 (T61206) | 0.65-0,75 | 0.25-0,80 | 0.030 | 0.030 | 0.60-1.20 | 0.50 | 1.25-2.00 | 0.10-0,50 | |
| JIS G4404-2006 | SKT4 | 0.50-0,60 | 0.60-0.90 | 0.030 | 0.020 | 0.80-1,20 | 0.35-0,55 | 1.50-1,80 | 0.05-0.15 | 0.10-0.40 |
| EN ISO 4957-1999 | 55NiCrMoV7 (1.2714) | 0.50-0,60 | 0.60-0.90 | 0.030 | 0.030 | 0.80-1,20 | 0.35-0,55 | 1.50-1,80 | 0.05-0.15 | 0.10-0.40 |
| ISO 4957:1999 | 55NiCrMoV7 | 0.50-0,60 | 0.60-0.90 | 0.030 | 0.030 | 0.80-1,20 | 0.35-0,55 | 1.50-1,80 | 0.05-0.15 | 0.10-0.40 |
1.2714 Thepa ea 'Mele ea Tšepe:
| Thepa ea 'Mele | Metric | Moemphera |
| Botenya | 7.86 g/cm³ | 0.284 lb/in³ |
| Sebaka se qhibilihang | 2590°F | 1421°C |
Ke Hobane'ng ha U re Khetha?
•U ka fumana thepa e phethahetseng ho latela tlhoko ea hau bonyane theko e ka khonehang.
•Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re fana ka tlhahiso ea hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.
•Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela. (Litlaleho li tla hlaha ho latela tlhoko)
•Re netefatsa hore re tla fana ka karabo nakong ea lihora tse 24 (hangata ka hora e tšoanang)
•Fana ka tlaleho ea SGS TUV.
•Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.
•Fana ka tšebeletso ea sebaka se le seng.
Ho paka:
1. Ho paka ke habohlokoa haholo-holo tabeng ea thepa ea machaba eo thepa e fetang ka litsela tse fapa-fapaneng ho fihla moo e eang teng, kahoo re amehile haholo ka ho paka.
2. Saky Steel e paka thepa ea rona ka mekhoa e mengata ho latela lihlahisoa. Re paka lihlahisoa tsa rona ka mekhoa e mengata, joalo ka,
