303 steaneng e se nang tšepe e se nang tšepe
Tlhaloso e khutšoane:
Sakteel keBar e se nang thusoMoetsi le barekisi Chaena, ba Ikhethileng Patlisisong, nts'etsopele le tlhahiso ea bara ba 303 ba nang le mabele.
| C% | Size | Mn% | P% | S% | Cr% | Ni% | N% | Mo% | Tis |
| <0,15 | <1.0 | <2.0 | <0,20 | <0,15 | 17.0-19.0 | 8.0-10.0 | - | - | - |
| Litlhaloso tsa bara ba batšehali ba 303 tsa steel ba se nang tšepe: |
| Tloaelo | Astm A276, A484, A584, A580, A580, A580, Jis G4303, Jis 1640, KS D3706, GB / T 1220 |
| Lintho tse bonahalang | 201,202,205, XM-19 jj. 3013,303) 309, 309, 3095,304, 310,30 409,410,410,410,420,420,430,43000, 431,440 2205 2077, S3209,22020,160-633, 17-5ph, 17-7ph, 90ph, 915L, F51, F553ma enc. |
| Bokantle | Ho nkuoa, ho peeled, ho peeled, ho ba letšo, lehlabathe, le khanyang, leloala, leriti, lerc |
| Theknoloji | E chesang e halikiloeng, e halikiloeng, khumama |
| Litlhaloso | 20 * 3mm -00 -100 * 10mm kapa joalo ka ha ho hlokahala |
| Ho mamella | + -2% |
| Lihlahisoa tsa 316 tsa spainle tsa tšepe tse tsoang Seterateng sa Sakysteel: |
 e apereng sete e se nang tšepe e sephara |  Sampup_logo hantle |
| Ts'ebeliso ea Bar ea 303 stein |
1.Domest: Cuglery, siling, sopho, meropa ea mochini, microwave e bulehileng li-bils
2.transsourt
3.OIl le khase: Sepache sa sethala, lipontšo tsa cable
4.Eesical: Lisebelisoa tsa ho buoa, li kopantsoe, limmapa tsa Mri li na le li-cris.
5.Food le lino: Lisebelisoa tsa ho tepella, ho river, ho khetholla, ho lokisa lijo
6. Metsi: Metsi le Phekolo ea Serea, litanka tsa metsi, litanka tsa metsi a chesang
7.general: Springs, Fasteners (Bolts, linate tsa linate), terata
8.chemical / Phatlalatso: Lijana tsa khatello, Ts'ebetso ea Tsamaiso
9. Jaripite ea Sechaba: Ho phalla, li-hardrails, litokelo tsa ntlo, li-collens tsa mabone, liluma-mesano, li-asonte tse tšehetsang
| Sebopeho sa lik'hemik'hale se nang le bar ea tšepe ea tšepe: |
| Ausnite Tšepe e se nang thuso | 3291 | 0126ni5Mo2 | <0,08 | 23.00-28.00 | 3.00-6.00 | <1.50 | <0.035 | <0.030 | 1.00-3.00 | <1.00 | - | 2) |
| 1R18ni11si11Si | 0.10-0.18 | 17.50-19.50 | 10.-120 .. | <0,80 | <0.035 | <0.030 | - | 3.40-4.00 | - | Al 0.10-0.30 ;30; TI 0.40-0.70 | ||
| 003R18ni5 | <0.030 | 18.00-19.50 | 4.50-5.50 | 1.00-2.00 | <0.035 | <0.030 | 2.50-3.00 | 1.30-2.00 | - | - | ||
| Tšepe e se nang thuso | 405 | 0133l | <0,08 | 11.50-14.50 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | Al 0.10-0.30 |
| 410l | 00CR12 | <0.030 | 11.00-13.00 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
| 430 | 1cr17 | <0.12 | 16.00-18.00 | 3) | <1.25 | <0.035 | <0.030 | - | <0.75 | - | - | |
| 430f | Y1cr17 | <0.12 | 16.00-18.00 | 3) | <1.00 | <0.035 | <0,15 | 1) | <1.00 | - | - | |
| 434 | 1CR17mo | <0.12 | 16.00-18.00 | 3) | <1.00 | <0.035 | <0.030 | 0.75-1.25 | <1.00 | - | - | |
| 447J1 | 00 Cher30MoMom | <0.010 | 28.50-32.00 | - | <0.40 | <0.035 | <0.030 | 1.50-2.50 | <0.40 | <0.015 | - | |
| Xm27 | 00cr27mo | <0.010 | 25.00-27.50 | - | <0.40 | <0.035 | <0.030 | 0.75-1.50 | <0.40 | <0.015 | - |
| Sesole sa Martterese | 403 | 1CR12 | <0,15 | 11.50-13.00 | 3) | <1.00 | <0.035 | <0.030 | - | <0,50 | - | - |
| 410 | 1r33 | <0,15 | 11.50-13.50 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
| 405 | 013 | <0,08 | 11.50-13.50 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
| 416 | Y1cr13 | <0,15 | 12.00-14.00 | 3) | <1.25 | <0.035 | <0,15 | 1) | <1.00 | - | - | |
| 410J1 | 1r33Mo | <0.08-0.18 | 11.50-14.00 | 3) | <1.00 | <0.035 | <0.030 | 0.30-0.60 | <0,60 | - | - | |
| 420J1 | 2cr13 | 0.16-0.25 | 12.00-14.00 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
| 420J2 | 3CR13 | 0.26-0.35 | 12.00-14.00 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
| 420f | Y3CR13 | 0.26-0.40 | 12.00-14.00 | 3) | <1.25 | <0.035 | <0,15 | 1) | <1.00 | - | - | |
| 3R13mo | 0.28-0.35 | 12.00-14.00 | 3) | <1.00 | <0.035 | <0.030 | 0.50-1,00 | <0,80 | - | - | ||
| 4CR13 | 0.36-0.45 | 12.00-14.00 |
