2011 Steel
Nuxurka naxaas ah: J4> J1> J3> J2> J5.
Kaadibo-ka: J5> J2> J3> J1> J4.
Qaanuunka adag: J5, J2> J3> J1> J4.
Amarka qiimaha sare ilaa hoose waa: J4> J1> J3> J2, J5.
J1 (QOFKA CODKA): Waxyaabaha kaarboon-ka-baxa ayaa waxyar ka sarreeya J4 oo nuxurka naxaas ah ayaa ka hooseeya J4. Waxqabadka howsha ayaa ka yar tii Lasj4. Waxay ku habboon tahay sawir gacmeedyo caadi ah iyo wax soo saarka sawirka qoto dheer, sida guddiga qurxinta, alaabada fayadhowrka, weelka weelka, tuubada wax soo saarka, iwm.
J2, J5, J5: Tuubbooyinka qurxinta: Tuubbooyinka qurxinta ee fudud ayaa weli wanaagsan, maxaa yeelay adkaanta ayaa ka sarreeya (labadaba korkiisa 96 °) iyo tuubada labajibbaaranaha ah, laakiin tuubada labajibbaaranaha ah ama tuubada qalooca (90 °) ayaa u nugul inuu dillaaco.
Marka laga hadlayo saxanka fidka ah: awgeed awgeed, dusha sare ee guddiga ayaa qurux badan, iyo dawada dusha sare sida
Fascation, profilation iyo placing waa la aqbali karaa. Laakiin dhibaatada ugu weyn waa dhibaatada foosha, Bend waa fududahay in la jebiyo, iyo jeexdinu waa fududahay in la burburo. Kordhinta liidata.
J3 (PERPER hoose): Ku habboon tuubooyinka qurxinta. Ka baaraandegga fudud waxaa lagu samayn karaa guddiga qurxinta, laakiin suurtagal maahan dhib yar. Waxaa jira jawaab celin ah in saxanka xiirashada uu qaloocsan yahay, oo waxaa jira tolmo gudaha ah ka dib jabinta ka dib jabinta (tagitaanka madow), taxan midab leh, saxanka santuuqa, jajabiyey, laalaaday tolnner. Qalabka saxanka ayaa la isku dayay inuu laabo, 90 digrii, laakiin ma sii socon doono.
J4 (naxaasta sare): Waa dhamaadka sare ee taxanaha J. Waxay ku habboon tahay noocyada xagal yar oo ah badeecadaha sawirka qoto dheer. Inta badan badeecadaha u baahan cusbada cusbada iyo milixda tijaabada cusbada ayaa dooran doona. Tusaale ahaan, saxamada, maacuunta jikada, waxyaabaha musqusha, dhalooyinka biyaha, dhalada biyaha, daaqadaha faaruqinta, xargaha albaabka, xididdada albaabka, iwm.
J1 J2 J2 J3 J6 H6 H6 HIS:
| Heer u qaybin | C | Mn | Si | P | S | Cr | Mo | Ni | Cu | N |
| J1 | 0.12 max | 9.0-11.0 | 0.80 max | 0.050 max | 0.008 max | 13.50 - 15.50 | 0.60 max | 0.90 - 2.00 | 0.70 daqiiqo | 0.10 - 0.20 |
| J2 | 0.20 max | 9.0 daqiiqo | 0.80 max | 0.060 max | 0.030 max | 13.0 daqiiqo | 0.60 max | 0.80 daqiiqo | 0.50 max | 0.20 max |
| J3 | 0.15 max | 8.5-11.0 | 0.80 max | 0.050 max | 0.008 max | 13.50 - 15.00 | 0.60 max | 0.90 - 2.00 | 0.50 min | 0.10 - 0.20 |
| J4 | 0.10 max | 9.0-11.0 | 0.80 max | 0.050 max | 0.008 max | 14.0 - 16.0 | 0.60 max | 0.90 - 2.00 | 1.40 daqiiqo | 0.10 - 0.20 |
| J6 | 0.15 max | 6.5 min | 0.80 max | 0.060 max | 0.030 max | 13.50 daqiiqo | 0.60 max | 3.50 daqiiqo | 0.70 daqiiqo | 0.10 daqiiqo |
Waqtiga Post: Jul-07-2020