DIN975 threaded rod is commonly known as lead screw or threaded rod. It has no head and is a fastener composed of threaded columns with full threads.DIN975 tooth bars are divided into three categories: carbon steel, stainless steel and non-ferrous metal.The DIN975 tooth bar refers to the German standard DIN975-1986, which stipulates a fully threaded screw with a thread diameter of M2-M52.
DIN975 tooth bar standard specification parameter table:
Nominal diameter d | Pitch P | The mass of every 1000 steel products ≈kg |
M2 | 0.4 | 18.7 |
M2.5 | 0.45 | 30 |
M3 | 0.5 | 44 |
M3.5 | 0.6 | 60 |
M4 | 0.7 | 78 |
M5 | 0.8 | 124 |
M6 | 1 | 177 |
M8 | 1/1.25 | 319 |
M10 | 1/1.25/1.5 | 500 |
M12 | 1.25/1.5/1.75 | 725 |
M14 | 1.5/2 | 970 |
M16 | 1.5/2 | 1330 |
M18 | 1.5/2.5 | 1650 |
M20 | 1.5/2.5 | 2080 |
M22 | 1.5/2.5 | 2540 |
M24 | 2/3 | 3000 |
M27 | 2/3 | 3850 |
M30 | 2/3.5 | 4750 |
M33 | 2/3.5 | 5900 |
M36 | 3/4 | 6900 |
M39 | 3/4 | 8200 |
M42 | 3/4.5 | 9400 |
M45 | 3/4.5 | 11000 |
M48 | 3/5 | 12400 |
M52 | 3/5 | 14700 |
Application of DIN975 Teeth:
DIN975 threaded strips are usually used in the construction industry, equipment installation, decoration and other connectors, such as: large supermarket ceilings, building wall fixing, etc.
Post time: Aug-28-2023