How to improve the quality of stainless steel wire rope ?
For the production process of stainless steel wire ropes, the quality of the stainless steel wire rope produced can sometimes be improved if some changes are made to certain production processes and the processing of certain details is perfected. Sakysteel share with you some of our experiences today.
1, should be based on the diameter of the inner rope, when the inner rope tanning, the outer layer of each share to leave sufficient space to avoid the use of stainless steel wire rope between the inner strands between the extrusion, resulting in deformation.
2, when the inner rope to produce slightly looser, stainless steel wire rope is mostly layered and tanned, if the inner rope tanning is not good, when tanning the outer rope, the inner rope rope stocks will appear At the same time, because the torsion torque of the outer rope is greater than the torsional moment of the inner rope, the inner rope is slightly looser when it is produced.
3. The distance between the outer ropes and the inner rope is greater than that of the inner ropes. The twist direction of the inner ropes and the twisting direction of the layers of the inner ropes are changed, and the pitch of the inner ropes is reduced. Because the torsional moment of the outer rope is greater than the torsion moment of the inner rope, the multiples of the warp and twist distances of each layer are well controlled. After the stainless steel wire ropes are twisted and cut, the outer ropes do not appear convex or inward. Shrinkage
4. The same length, same strength stainless steel wire rope is produced on the unified machine.
Enhancing the quality of stainless steel wire ropes is a need to increase the competitiveness of enterprises, and it is also in line with the needs of market changes and development. Therefore, we should take innovation as the driving force, continuously improve the process, improve the working performance of stainless steel wire ropes, and bring higher quality products to the market.
Post time: Jun-05-2018