UNS S31803 F51 Duplex Steel Round Bar
Nkọwa dị mkpirikpi:
| Nkọwapụta Ogwe Duplex Steel UNS S31803 Ogwe okirikiri: |
| Nkọwapụta | ASTM A276, ASME SA276, ASTM A182 F51 |
| Akụkụ | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Nha | 6 mm ruo 120 mm. |
| Dayameta | 6mm ruo 350mm dayameta |
| Ọkpụrụkpụ | Ogologo 100 ruo 6000 mm |
| Ndidi | +/-0.2mm |
| Mechaa | Ojii, Na-egbukepụ egbukepụ, Mgbanwe siri ike, NO.4 Mecha, Matt Finish, BA Icha |
| Ogologo | 1 ruo 6 mita, ogologo ịkpụ omenala |
| Ụdị | Gburugburu, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging etc. |
| Ọkwa nke Duplex Steel UNS S31803 Ogwe okirikiri: |
| Ọkọlọtọ | Ọrụ NR. | UNS |
| Duplex 31803 | 1.4462 | S31803 |
| Ngwakọta kemịkalụ nke Duplex Steel UNS S31803 Ogwe okirikiri: |
| Ọkwa | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| Duplex S31803 | 0.030 kacha | 2 max | 1 max | 0.030 kacha | 0.020 kacha | 22-23 | 3-3.5 | 4.50 - 6.50 | 0.14 - 0.20 | 63.72 min |
| Njirimara igwe nke Duplex Steel UNS S31803 Ogwe okirikiri: |
| akara ule | Njupụta (g/cm 3) | Njupụta (lb/na 3) | Ebe mgbaze (°C) | Ebe mgbaze (°F) |
| S31803 | 7.805 | 0,285 | 1420-1465 | 2588-266 |
| Nkwakọ ngwaahịa gbara okirikiri UNS S31803 Round Bars: |
Ngwa Duplex Steel UNS S31803 Round Bars:
Companieslọ ọrụ na-egwupụta mmanụ na-apụ apụ na-arụ ọrụ gas na-emepụta ike nke Petrochemicals
Ngwa Kemịkalụ Ọpụrụiche Ngwa Ngwa kemịkalụ.
Ọ bụrụ na ị chọrọ ịmatakwu banyere duplex ígwè ngwaahịa, Biko gaa n'ihu na-eletaSasa Alloywebụsaịtị, ị nwere ike nweta ozi ndị ọzọ.
