igwe anaghị agba nchara

Nkọwa dị mkpirikpi:


  • Nkọwapụta:ASTM A240
  • Mechaa:2B Mill (dull), #4 ahịhịa
  • Teknụzụ:Oyi Rolling & Hot Rolling
  • Ọkpụrụkpụ:0.1mm ka 100mm
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    Igwe igwe anaghị agba nchara Otu ihe ngosi ọrụ:

    Nkọwapụta: AISI 304/304L, ASTM A240, AMS 5513/5511
    · Emechara: 2B Mill (dull), #4 brushed (ngwaọrụ), #8 mirror
    Ngwa: mmiri ara ehi ịdị ọcha, ihe ọṅụṅụ na nri ngwaahịa njikwa na nhazi, akụrụngwa ụlọ ọgwụ, ngwa mmiri mmiri, ngwa kichin, splashes azụ, wdg.
    · Arụ ọrụ: Ọ dị mfe Weld, ịkpụ, ụdị na igwe nwere akụrụngwa kwesịrị ekwesị
    · Ihe arụrụ arụ: Na-abụghị magnetik, Tensile = 85,000 +/-, Mpụta = 34,000 +/-, Brinell = 170
    Kedu ka esi atụle ọkpụrụkpụ X obosara X ogologo
    Nha Ọkwa dị: 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft ma ọ bụ Bee ka nha

     

    Ngwakọta kemịkalụ na akụrụngwa:
    C% Si% Mn% P% S% kr% Ni% N% mo% Cu%
    0.08 1.0 2.0 0,045 0.03 18.0-20.0 8.0-10.0 - - -

     

    T*S Y*S Isi ike Ogologo oge
    (Mpa) (Mpa) HRB HB (%)
    520 205 - - 40

     

    Nkọwa nke igwe anaghị agba nchara 304:
    Ngwaahịa Igwe anaghị agba nchara 2B NO.1 imecha
    Ụdị ihe igwe anaghị agba nchara, nonmagnetic.
    Isi ihe onwunwe sakysteel, TISCO, BAOSTEEL, JISCO, POSCO
    Ọkwa Usoro 200, usoro 300, usoro 400
    Nkà na ụzụ Oyi Rolling & Hot Rolling
    Ọkpụrụkpụ 0.1mm ka 100mm
    Obosara 600mm ruo 2500mm
    Ogologo 1219x2440mm (4'x8'), 1250x2500mm, 1500 * 6000mm ma ọ bụ ihe ọ bụla ọzọ ahaziri size
    Elu BA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, SB, Embossed
    Ọnụ Mill Edge, Slit Edge
    Nhọrọ ndị ọzọ Ọkwa: melite flatness, esp. maka ihe na elu flatness arịrịọ.
    Skin-Pass: melite flatness, elu nchapụta
    Mwepu nkewa: obosara ọ bụla site na 10mm ruo 200mm
    Mpempe akwụkwọ: Mpempe mgbịrịgba, mpempe akwụkwọ retangle, okirikiri, ụdị ndị ọzọ
    Nchedo 1. Inter akwụkwọ dị
    2. Ihe nkiri nchekwa PVC dị
    Nkwakọ ngwaahịa Mpempe akwụkwọ na-egbochi mmiri + Nchekwa Edge + Pallets osisi
    Oge mmepụta 20-45 ụbọchị dabere na nhazi chọrọ & oge azụmahịa
    Oge ịkwụ ụgwọ T/T, L/C a na-apụghị ịgbagha agbagha na anya

     

    Elu nke SS 304 eriri igwe:
    Emecha elu elu Nkọwa Ngwa
    2B Ndị ahụ emechara, ka oyi gachara, site na ọgwụgwọ okpomọkụ, ịhịa aka n'ahụ ma ọ bụ ọgwụgwọ ndị ọzọ dabara na nke ikpeazụ site n'ịtụgharị oyi na-enye ọkụ kwesịrị ekwesị. Akụrụngwa ọgwụ, ụlọ ọrụ nri, ihe eji ewu ụlọ, arịa kichin.
    BA Ndị na-edozi ya na ọgwụgwọ okpomọkụ na-egbuke egbuke mgbe oyi na-atụgharị. Ngwa kichin, Akụrụngwa eletriki, Owuwu ụlọ.
    NO.3 Ndị mechara site na polishing na No.100 ka No.120 abrasives kpọmkwem na JIS R6001. Ngwa kichin, Ihe owuwu ụlọ.
    NO.4 Ndị mechara site na polishing na No.150 ka No.180 abrasives kpọmkwem na JIS R6001. Ngwa kichin, Ihe owuwu ụlọ, akụrụngwa ọgwụ.
    HL Ndị na-emecha polishing ka ọ na-enye na-aga n'ihu polishing streaks site na iji abrasive nke kwesịrị ekwesị ọka size. Owuwu ụlọ.
    NO.1 N'elu okokụre site okpomọkụ ọgwụgwọ na pickling ma ọ bụ Filiks kwekọrọ n'ebe ahụ mgbe na-ekpo ọkụ Rolling. Chemical tank, ọkpọkọ.

     

    Ọkwa ndị ọzọ nke igwe anaghị agba nchara:
    Ụdị Ọkwa Ọkwa Akụkụ kemịkalụ%
    Austenitic igwe anaghị agba nchara C Cr Ni Mn
    201 1Cr17Mn6Ni5N 0.15 16.00-18.00 3.50-5.50 5.50-7.50
    201L 03Cr17Mn6Ni5N 0,030 16.00-18.00 3.50-5.50 5.50-7.50
    202 1Cr18Mn8Ni5N 0.15 17.00-19.00 4.00-6.00 7.50-10.00
    204 03Cr16Mn8Ni2N 0,030 15.00-17.00 1.50-3.50 7.00-9.00
    1Cr18Mn10Ni5Mo3N 0.10 17.00-19.00 4.00-6.00 8.50-12.00
    2Cr13Mn9Ni4 0.15-0.25 12.00-14.00 3.70-5.00 8.00-10.00
    2Cr15Mn15Ni2N 0.15-0.25 14.00-16.00 1.50-3.00 14.00-16.00
    1Cr18Mn10Ni5Mo3N 0.15 17.00-19.00 4.00-6.00 8.50-12.00
    301 1Cr17Ni7 0.15 16.00-18.00 6.00-8.00 2.00
    302 1Cr18Ni9 0.15 17.00-19.00 8.00-10.00 2.00
    303 Y1Cr18Ni9 0.15 17.00-19.00 8.00-10.00 2.00
    303se Y1Cr18Ni9Se 0.15 17.00-19.00 8.00-10.00 2.00
    304 0Cr18Ni9 0.07 17.00-19.00 8.00-10.00 2.00
    304L 00Cr19Ni10 0,030 18.00-20.00 8.00-10.00 2.00
    304N1 0Cr19Ni9N 0.08 18.00-20.00 7.00-10.50 2.00
    304N2 0Cr18Ni10NbN 0.08 18.00-20.00 7.50-10.50 2.00
    304LN 00Cr18Ni10N 0,030 17.00-19.00 8.50-11.50 2.00
    305 1Cr18Ni12 0.12 17.00-19.00 10.50-13.00 2.00
    309S 0Cr23Ni13 0.08 22.00-24.00 12.00-15.00 2.00
    310S 0Cr25Ni20 0.08 24.00-26.00 19.00-22.00 2.00
    316 0Cr17Ni12Mo2 0.08 16.00-18.50 10.00-14.00 2.00
    1Cr18Ni12Mo2Ti6) 0.12 16.00-19.00 11.00-14.00 2.00
    0Cr18Ni12Mo2Ti 0.08 16.00-19.00 11.00-14.00 2.00
    316L 00Cr17Ni14Mo2 0,030 16.00-18.00 12.00-15.00 2.00
    316N 0Cr17Ni12Mo2N 0.08 16.00-18.00 10.00-14.00 2.00
    316N 00Cr17Ni13Mo2N 0,030 16.00-18.50 10.50-14.50 2.00
    316J1 0Cr18Ni12Mo2Cu2 0.08 17.00-19.00 10.00-14.50 2.00
    316J1L 00Cr18Ni14Mo2Cu2 0,030 17.00-19.00 12.00-16.00 2.00
    317 0Cr19Ni13Mo3 0.12 18.00-20.00 11.00-15.00 2.00
    317L 00Cr19Ni13Mo3 0.08 18.00-20.00 11.00-15.00 2.00
    1Cr18Ni12Mo3Ti6 0.12 16.00-19.00 11.00-14.00 2.00
    0Cr18Ni12Mo3Ti 0.08 16.00-19.00 11.00-14.00 2.00
    317J1 0Cr18Ni16Mo5 0,040 16.00-19.00 15.00-17.00 2.00
    321 1Cr18Ni9Ti6 0.12 17.00-19.00 8.00-11.00 2.00
    0Cr18Ni10Ti 0.08 17.00-19.00 9.00-12.00 2.00
    347 0Cr18Ni11Nb 0.08 17.00-19.00 9.00-13.00 2.00
    XM7 0Cr18Ni9Cu3 0.08 17.00-19.00 8.50-10.50 2.00
    XM15J1 0Cr18Ni13Si4 0.08 15.00-20.00 11.50-15.00 2.00

  • Nke gara aga:
  • Osote:

  • Ngwaahịa ndị emetụtara