430 Pepa kila kila
ʻO ka wehewehe pōkole:
Nā kikoʻī opepa kila kila: |
Nā kikoʻī:ASTM A240 / ASME SA240
Papa:304L, 316L, 309, 309S, 321,347, 347H, 410, 420,430
laula:1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc.
Ka lōʻihi:2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc.
mānoanoa:0.3 mm a 30 mm
Hoʻopau ʻili:ʻO ka pā wela wela (HR), Pepa ʻōwili anuanu (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, aniani, laina lauoho, SATIN (Met with Plastic Coated) etc.
Māhele Makaʻu:POSCO, Aperam, Acerinox, Thyssenkrup, Baosteel, TISCO, Arcelor Mittal, Saky Steel, Outokumpu
ʻAno:Nā Coils, Foils, Rolls, Plain Plain, Sheet Shim, Perforated Sheet, Checkered Plate, Strips, Flats, etc.
ʻO ke kila kila 430 Pepa a me nā Papa Kūlike: |
KUMU | WERKSTOFF NR. | UNS |
SS 430 | 1.4016 | S43000 |
SS 430Nā Pepa, Nā Papa Hana Kemikō a me nā waiwai Mechanical (saky steel): |
Papa | C | Mn | Si | P | S | Cr | Ni | Mo |
SS 430 | 0.12 ka nui | 1.0 ka nui | 1.0 ka nui | 0.040 ka nui | 0.030 ka nui | 16.0 – 18.0 | 0.75 | - |
Ikaika U'i | Ka ikaika o ka hua (0.2%offset) | Elongation (i loko o 2 in.) |
MPa – 450 | MPa – 205 | 22 % |
No ke aha e koho ai iā mākou: |
1. Hiki iā ʻoe ke loaʻa ka mea kūpono e like me kāu koi ma ka liʻiliʻi loa o ke kumu kūʻai.
2. Hāʻawi pū mākou i nā Reworks, FOB, CFR, CIF, a me nā kumukūʻai hoʻopuka puka. Manaʻo mākou iā ʻoe e hana i ka hana no ka hoʻouna ʻana e ʻoi aku ka waiwai.
3. ʻO nā mea a mākou e hāʻawi nei ua hiki ke hōʻoia ʻia, mai ka palapala hōʻike maka a hiki i ka ʻōlelo kikoʻī hope loa. (E hōʻike ʻia nā hōʻike ma ke koi)
4. e hōʻoiaʻiʻo e hāʻawi i ka pane i loko o 24hours (maʻamau i ka hola hoʻokahi)
5. Hiki iā ʻoe ke kiʻi i nā mea kūʻai ʻokoʻa, nā hāʻawi wili me ka hōʻemi ʻana i ka manawa hana.
6. Hoʻolaʻa piha mākou i kā mākou mea kūʻai. Inā ʻaʻole hiki ke hoʻokō i kāu mau koi ma hope o ka nānā ʻana i nā koho āpau, ʻaʻole mākou e alakaʻi hewa iā ʻoe ma ka hana ʻana i nā ʻōlelo hoʻohiki wahaheʻe e hoʻokumu ai i nā pilina mea kūʻai aku.
ʻO SAKY STEEL'S Quality Assurance (me nā mea luku a me ka non-destructive): |
1. Ho'āʻo ʻana i ke ana ʻike
2. Mechanical nānā 'ana e like me tensile, Elongation a me ka ho'ēmi 'āpana.
3. Ka nānā 'ana i ka hopena
4. Ka nānā 'ana i ka ho'ā'o kemika
5. Hoao paakiki
6. Ho'āʻo pale lua
7. Hoao Penetrant
8. Intergranular Corrosion Ho'āʻo
9. Ho'āʻo Roughness
10. Ho'āʻo hoʻokolohua Metallography
ʻO SAKY STEEL'S Packaging: |
1. He mea koʻikoʻi ka hoʻopaʻa ʻana ma ka hihia o ka hoʻouna ʻana i ka honua kahi e hele ai ka lawe ʻana ma nā ala like ʻole e hiki ai i ka hopena hope loa, no laila ke kau nei mākou i ka hopohopo kūikawā e pili ana i ka ʻeke.
2. Hoʻopili ʻo Saky Steel i kā mākou waiwai ma nā ʻano he nui e pili ana i nā huahana. Hoʻopili mākou i kā mākou huahana ma nā ʻano he nui, e like me,
ʻO ka ʻili maʻamau o Saky steel no nā huahana pālahalaha mai EN 10088-2 (no ka papa inoa piha e ʻike i ka hoʻopau ʻana no nā huahana palahalaha kila kila (pepa): |
Hoʻopau ʻili | Wehewehe | Palapala noi |
2B | ʻO nā mea i hoʻopau ʻia, ma hope o ka ʻōwili anu, ma ka mālama ʻana i ka wela, pickling a i ʻole nā lāʻau like ʻē aʻe a ʻo ka hope ma ka ʻōwili anu i hāʻawi ʻia i ka luster kūpono. | Nā lako lapaʻau, ʻoihana meaʻai, mea kūkulu hale, nā lako kīhini. |
BA | ʻO ka poʻe i hana ʻia me ka mālama ʻana i ka wela ma hope o ka ʻōwili anu. | Nā lako kīhini, nā lako uila, ka hana hale. |
NO.3 | ʻO nā mea i hoʻopau ʻia ma ka hoʻoliʻi ʻana me ka No.100 a i ka No.120 abrasives i kuhikuhi ʻia ma JIS R6001. | Nā lako kīhini, Ke kūkulu hale. |
NO.4 | ʻO ka poʻe i hoʻopau ʻia ma ka poli ʻana me ka No.150 a i ka No.180 abrasives i kuhikuhi ʻia ma JIS R6001. | Nā lako kīhini, kūkulu hale, Lapaʻau lapaʻau. |
HL | ʻO ka poʻe i hoʻopau i ka hoʻoliʻiliʻi ʻana i mea e hāʻawi mau ai i nā kaha poli me ka hoʻohana ʻana i ka abrasive o ka nui o ka palaoa kūpono. | Kapili Hale. |
NO.1 | Hoʻopau ʻia ka ʻili e ka mālama wela a me ka pickling a i ʻole nā kaʻina hana e pili ana i laila ma hope o ka ʻōwili wela. | pahu kimeka |