2 INCH paipu hao hao / paipu

ʻO ka wehewehe pōkole:


  • Nā kikoʻī:ASTM A/ASME A249
  • Papa:304, 304L, 316, 316L
  • Ka lōʻihi:5.8M,6M & Koi ʻia ka lōʻihi
  • mānoanoa:0.3mm – 20mm
  • Huahana Huahana

    wikiō

    Huahana Huahana

    Nā kikoʻī opaipu kila kila:

    Nui o nā paipu a me nā paipu :1 / 8″ NB – 24″ NB

    Nā kikoʻī:ASTM A/ASME A249, A268, A269, A270, A312, A790

    Papa:304, 304L, 316, 316L, 316H, 316Ti, 321, 409L

    Ka lōʻihi:5.8M,6M & Koi ʻia ka lōʻihi

    Anawaena waho:6.00 mm OD a hiki i 1500 mm OD

    mānoanoa:0.3mm – 20mm,

    Hōʻike:SCH 5, SCH10, SCH 40, SCH 80, SCH 80S

    Hoʻopau ʻili:Mill Finish, Polishing (180 #, 180 # hairline, 240 # hairline, 400 #,600 #), Mirror etc

    Nā ʻano:Weled, EFW, ERW

    ʻAno:Poʻai, ʻAha, ʻAʻohe

    Hoʻopau :Wela Plain, Wehe Pihe

     

    Papa Ka Hui Kemika (%)
      C Si Mn P S Ni Cr Mo
    201 <0.15 <1.00 5.5-7.5 <0.060 <0.030 3.50~5.50 16.00-18.00  
    301 <0.15 <1.00 <2.00 <0.045 <0.030 6.00-8.00 16.00-18.00  
    302 <0.15 <1.00 <2.00 <0.045 <0.030 8.00-10.00 17.00-19.00  
    304 <0.08 <1.00 <2.00 <0.045 <0.030 8.00-10.50 18.00-20.00 -
    304L <0.030 <1.00 <2.00 <0.045 <0.030 9.00-13.50 18.00-20.00 -
    316 <0.045 <1.00 <2.00 <0.045 <0.030 10.00-14.00 10.00-18.00 2.00-3.00
    316L <0.030 <1.00 <2.00 <0.045 <0.030 12.00-15.00 16.00-18.00 2.00-3.00
    430 <0.12 <0.75 <1.00 <0.040 <0.030 <0.60 16.00-18.00 -
    430A <0.06 <0.50 <0.50 <0.030 <0.50 <0.25 14.00-17.00 -

     

    No ke aha e koho ai iā mākou:

    1. Hiki iā ʻoe ke loaʻa ka mea kūpono e like me kāu koi ma ka liʻiliʻi loa o ke kumu kūʻai.
    2. Hāʻawi pū mākou i nā Reworks, FOB, CFR, CIF, a me nā kumukūʻai hoʻopuka puka. Manaʻo mākou iā ʻoe e hana i ka hana no ka hoʻouna ʻana e ʻoi aku ka waiwai.
    3. ʻO nā mea a mākou e hāʻawi nei ua hiki ke hōʻoia ʻia, mai ka palapala hōʻike maka a hiki i ka ʻōlelo kikoʻī hope loa. (E hōʻike ʻia nā hōʻike ma ke koi)
    4. e hōʻoiaʻiʻo e hāʻawi i ka pane i loko o 24hours (maʻamau i ka hola hoʻokahi)
    5. Hiki iā ʻoe ke kiʻi i nā mea kūʻai ʻokoʻa, nā hāʻawi wili me ka hōʻemi ʻana i ka manawa hana.
    6. Hoʻolaʻa piha mākou i kā mākou mea kūʻai. Inā ʻaʻole hiki ke hoʻokō i kāu mau koi ma hope o ka nānā ʻana i nā koho āpau, ʻaʻole mākou e alakaʻi hewa iā ʻoe ma ka hana ʻana i nā ʻōlelo hoʻohiki wahaheʻe e hoʻokumu ai i nā pilina mea kūʻai aku.

     

    ʻO SAKY STEEL'S Quality Assurance (me nā mea luku a me ka non-destructive):

    1. Ho'āʻo ʻana i ke ana ʻike
    2. Mechanical nānā 'ana e like me tensile, Elongation a me ka ho'ēmi 'āpana.
    3. Ka ho'āʻo nui
    4. Ka nānā 'ana i ka ho'ā'o kemika
    5. Hoao paakiki
    6. Ho'āʻo pale lua
    7. Ho'āʻo ʻia ʻana
    8. Hoao Wai-Jet
    9. Hoao Penetrant
    10. X-ray hoao
    11. Intergranular Corrosion Hoao
    12. Ka nānā 'ana i ka hopena
    13. Ho'āʻo hoʻokolohua Metallography

     

    SAKY STEEL'SPackaging:

    1. He mea koʻikoʻi ka hoʻopaʻa ʻana ma ka hihia o ka hoʻouna ʻana i ka honua kahi e hele ai ka lawe ʻana ma nā ala like ʻole e hiki ai i ka hopena hope loa, no laila ke kau nei mākou i ka hopohopo kūikawā e pili ana i ka ʻeke.
    2. Hoʻopili ʻo Saky Steel i kā mākou waiwai ma nā ʻano he nui e pili ana i nā huahana. Hoʻopili mākou i kā mākou huahana ma nā ʻano he nui, e like me, Shrink-wrapped, pahu pahu pahu, pallet lāʻau, pahu lāʻau, pahu lāʻau.

    无缝管包装


    Nā noi:

    1. Nā ʻāpana kaʻa, Lapaʻau lapaʻau
    2. Heat Exchanger, ʻOihana meaʻai
    3. Mahiai, Uila, Kemika
    4. Kemika lanahu; ʻImi ʻaila a me ke kinoea
    5. Hoomaemae aila, Kinoea maoli; Mea hana

     


  • Mua:
  • Aʻe:

  • Nā Huahana Pili