Hastelloy C-4
Short Description:
Hastelloy C-4 (UNS NO6455)
Hastelloy C-4 Features and Applications Overview:
The alloy is an austenitic low-carbon nickel-molybdenum-chromium alloy. The main difference between Nicrofer 6616 hMo and other alloys of similar chemical composition developed earlier is low carbon, silicon, iron and tungsten. This chemical composition provides excellent stability at 650-1040 ° C and improved resistance to intergranular corrosion, avoiding edge line corrosion susceptibility and weld HAZ corrosion under appropriate manufacturing conditions. Alloy used in flue gas desulfurization systems, pickling and acid regeneration plant, acetic acid and agricultural chemicals production, titanium dioxide production (chloride method), electrolytic plating.
Hastelloy C-4 Similar brands:
NS335 (China) W.Nr.2.4610 NiMo16Cr16Ti (Germany)
Hastelloy C-4 Chemical composition:
Alloy |
% |
Ni |
Cr |
Fe |
Mo |
Nb |
Co |
C |
Mn |
Si |
S |
Cu |
Al |
Ti |
Hastelloy C-4 |
Min |
Margin |
14.5 |
14.0 |
||||||||||
Maximum |
17.5 |
3.0 |
17.0 |
2.0 |
0.009 |
1.0 |
0.05 |
0.01 |
0.7 |
Hastelloy C-4 Physical Properties:
Density |
Melting point |
Thermal conductivity |
Specific heat capacity |
Elastic Modulus |
Shear modulus |
Resistivity |
Poisson’s ratio |
Linear expansion coefficient |
8.6 |
1335 |
10.1(100℃) |
408 |
211 |
1.24 |
10.9(100℃) |
Hastelloy C-4 Mechanical Properties: (minimum mechanical properties at 20 ℃):
Heat treatment methods |
Tensile strengthσb/MPa |
Yield Strengthσp0.2/MPa |
Elongation rate σ5 /% |
Brinell hardness HBS |
Solution treatment |
690 |
275 |
40 |
Hastelloy C-4 production standards:
Standard |
Bar |
Forgings |
Plate (with) material |
Wire |
Pipe |
American Society for Testing and Materials |
ASTM B574 |
ASTM B336 |
ASTM B575 |
ASTM B622 |
|
American Aerospace Materials Technical Specification |
|||||
American Society of Mechanical Engineers |
ASME SB574 |
ASME SB336 |
ASME SB575 |
ASTM SB622 |
Hastelloy C-4 process performance and requirements:
1, In the heat treatment process can not contact with sulfur, phosphorus, lead and other low melting point metal, or the alloy will become brittle, should pay attention to remove such as marking paint, temperature indicator paint, colored crayons, lubricants, fuel and other dirt. The lower the sulfur content of the fuel the better, the sulfur content of natural gas should be less than 0.1%, the sulfur content of heavy oil should be less than 0.5%. Electric furnace heating is a better choice, because the electric furnace can accurately control the temperature and the furnace gas is clean. If the gas stove gas pure enough, you can choose.
2, alloy thermal processing temperature range of 1080 ℃ ~ 900 ℃, cooling method for water cooling or other rapid cooling. To ensure the best corrosion resistance, heat treatment should be carried out after solution heat treatment.