316 Bakin Karfe Square bututu/Tubing

Takaitaccen Bayani:


  • Daidaito:ASTM A312, ASTM A213
  • Daraja:304, 304L, 316, 316L, 321
  • Kauri:0.8mm - 40mm
  • saman:Matt Finish, Brush, Ƙarshe maras ban sha'awa
  • Cikakken Bayani

    Tags samfurin

    TP316 Bakin Karfe Square Tubing, SUS316, S31600, EN1.4401, X5CRNIMO, SS 316 lalata resistant a cikin iri-iri na ruwa da sinadarai yanayi da kyau kwarai juriya juriya, nauyi (Kg / Mita) = 0.02513 * kauri (mm)* (OD- kauri)(mm)

    C% Si% Mn% P% S% Cr% Ni% N% Mo% Ti%
    0.08 0.75 2.0 0.045 0.03 16.0-18.0 10.0-14.0 - 2.0-3.0 -

     

    Bayanan Bayani na 316 Bakin Karfe Square Pipe:
    Suna 316 Bakin Karfe Square Pipe
    Bakin Karfe tubing
    Daidaitawa GB/T14975, GB/T14976, GB13296-91, GB9948, ASTM A312, ASTM A213,
    ASTM A269, ASTM A511, JIS349, DIN17456, ASTM A789, ASTM A790, DIN17456, DIN17458, EN10216-5, JIS3459,GOST 9941-81
    Matsayin Material 304, 304L, 316, 316L, 321, 321H, 310S, 347H, 309.317.0cr18N9, 0Cr25Ni20
    00Cr19Ni10,08X18H10T,S31803,S31500,S32750
    Diamita na waje 6mm zuwa 1219mm
    Kauri 0.8mm - 40mm
    Girman OD (6-1219) mm x (0.9-40)mm x MAX 13000mm
    Hakuri A karkashin ASTM A312 A269 A213
    A karkashin ASTM A312 A269 A213
    A karkashin ASTM A312 A269 A213
    Surface 180G, 320G Satin / Hairline
    TSARA & RAGEWA
    Aikace-aikace Ruwa da iskar gas, kayan ado, gini, kayan aikin likita, jirgin sama,
    tukunyar jirgi mai musayar zafi da sauran filayen
    Gwaji Gwajin Flattening, Gwajin Hydrostatic, Gwajin Lalacewar Intergranular, Gwajin Lalacewa, Gwajin Eddy, da sauransu.
    Musamman wasu ƙayyadaddun bayanai bisa ga bukatun abokan ciniki
    Lokacin bayarwa har zuwa adadin oda
    Shiryawa Haɗe da jakar filastik saƙa, shari'o'in katako ko bisa ga buƙatar abokan ciniki.
    Kayan Injiniya Abun Abu 304 304l 304 316l Babban Fasaha
    Ƙarfin Ƙarfi 520 485 520 485
    Ƙarfin Haɓaka 205 170 205 170
    Tsawaitawa 35% 35% 35% 35%
    Hardness (HV) <90 <90 <90 <90

     

    Ƙarin cikakkun bayanai na Bakin Karfe Square Pipe:
    Daraja Haɗin Sinadari (%)
    C Si Mn P S Ni Cr Mo
    201 0.15 1.00 5.5 ~ 7.5 0.060 0.030 3.50 ~ 5.50 16.00-18.00
    301 0.15 1.00 2.00 0.045 0.030 6.00 ~ 8.00 16.00-18.00
    302 0.15 1.00 2.00 0.045 0.030 8.00 ~ 10.00 17.00-19.00
    304 0.08 1.00 2.00 0.045 0.030 8.00 ~ 10.50 18.00-20.00 -
    304l 0.030 1.00 2.00 0.045 0.030 9.00 ~ 13.50 18.00-20.00 -
    316 0.045 1.00 2.00 0.045 0.030 10.00-14.00 10.00-18.00 2.00 ~ 3.00
    316l 0.030 1.00 2.00 0.045 0.030 12.00-15.00 16.00-18.00 2.00 ~ 3.00
    430 0.12 0.75 1.00 0.040 0.030 0.60 16.00-18.00 -
    430A 0.06 0.50 0.50 0.030 0.50 0.25 14.00 ~ 17.00 -

     

    Kayan abu Bakin Karfe Austenite: Rs-2,317L,904L,253Ma(S30815),254SMo(F44/S31254)
    Biphase bakin karfe F51(S31803),F53(S32750),F55(S32760),329(S32900),A4
    Hastelloy C276, Hastelloy C4, Hastelloy C22. Hastelloy B, Hastelloy B-2
    Nitronic50(S20910/XM-19), Nitronic60(S21800/Alloy218), Alloy20Cb-3, Alloy31(N08031/1.4562)
    Incoloy825, 309S, Inconel601,A286, Alloy59, 316Ti, SUS347, 17-4PH Nickle201… Ect.
    Monel400, Monel k500, Ninckel200, Nickel201(N02201)
    Inconel600(N06600),Inconel601(N06601),Inconel625(N06625/NS336),Inconel718(N07718/GH4169),Inconelx-750(N07750/GH4145)
    Incoloy800H(NS112/N08810),Incoloy800HT(N08811),Incoloy800(NS111/N08800),Incoloy825(N08825/NS142), Incoloy901,Incoloy925(N09925)
    1J50,1J79,3J53,4J29(F15),4J36(Invar36)
    GH2132(incoloyA-286/S66286),GH3030,GH3128,BH4145(inconelx-750/N07750),GH4180(N07080/Nimonic80A)
    Logo JYSS, kuma bisa ga bukatun abokin ciniki
    MOQ 1pcs a kalla, kuma bisa ga girman da abu
    Siyan tasha ɗaya muna taimaka muku da siyayya tasha ɗaya, za mu iya kera fasteners, flanges da kuma kayan aikin bututu akan waɗannan ƙayayyun kayan.
    OEM An Karɓa Ee
    Takaddun gwaji na Mill Ee
    Rahoton dubawa Ee
    Lokacin biyan kuɗi L/CT/T
    Cikakkun bayanai wodden case ko kamar yadda abokin ciniki bukata
    Kasashen da ake fitarwa Amurka, Jamus, Saudi Arabia, Koriya ta Kudu, da dai sauransu
    Gudun samarwa Raw kayan Duban albarkatun kasa Yanke dumama ƙirƙira stamping-
    Drilling Machining Dumi Jiyya Wanke Gwajin mara lalacewa
    Ƙarshen Binciken samfur

    Amfani:

    Kunshin akwati na 1.Woden wanda yake da ƙarfi kuma ya dace da jigilar teku shine babban hanyar mu don ɗaukar bututu. Kuma hanyar tattara kayayyaki na tattalin arziki kamar cushe cikin dam wasu abokan ciniki kuma suna maraba da su.
    2.The haƙuri iko da muke amfani da shi ne D4 / T4 (+/- 0.1mm) a duka ciki da waje Diamita da Wall kauri, wanda ya fi girma fiye da kasa da kasa misali ASTM, DIN.
    3.The surface yanayin yana daya daga cikin mu main abũbuwan amfãni: domin saduwa daban-daban bukatun ga surface yanayin, muna da annealing da pickling surface, mai haske annealing surface, OD goge surface, OD & ID goge surface da dai sauransu.
    4.Don ci gaba da tsaftace cikin bututu mai tsabta da kuma sanya shi kyauta daga ɓarna, kamfaninmu yana haɓaka fasaha na musamman da na musamman - Wanke Soso tare da babban matsin lamba.8.Muna da cikakken sabis na tallace-tallace don magance matsalolin a lokaci. .


  • Na baya:
  • Na gaba:

  • Samfura masu dangantaka