303 Barra Maol Cruach Dhosmálta
Cur síos gairid:
Tá SakysteelBarra Maol Dhosmáltamonaróir agus soláthraithe sa tSín, speisialaithe i dtaighde, forbairt agus táirgeadh 303 Barra Maol Cruach Dhosmálta.
C% | si % | Mn% | P% | S% | Cr % | ni% | N% | Mo% | Ti % |
<0.15 | <1.0 | <2.0 | <0.20 | <0.15 | 17.0-19.0 | 8.0-10.0 | – | – | – |
Sonraíochtaí 303 Barra Maol Cruach Dhosmálta: |
Caighdeán | ASTM A276, A484, A479, A580, A582, JIS G4303, JIS G4311, DIN 1654-5, DIN 17440, KS D3706, GB/T 1220 |
Ábhar | 201,202,205, XM-19 etc. 301,303,304,304L,304H,309S,310S,314,316,316L,316Ti,317,321,321H,329,330,348 etc. 409,410,416,420,430,430F,431,440 2205,2507,S31803,2209,630,631,15-5PH,17-4PH,17-7PH,904L,F51,F55,253MA etc. |
Dromchla | Picilte, scafa, Dubh, Soinneáin Gainimh, Geal, Muileann, Scáthán, Hairline etc |
Teicneolaíocht | Te Iarchurtha, Táthaithe, Bend |
Sonraíochtaí | 20 * 3mm -100 * 10mm nó mar is gá |
Caoinfhulaingt | +-2% |
316 táirge Barra Comhréidh Cruach Dhosmálta ó sakysteel: |
barra cothrom cruach dhosmálta picilte | Sample_Logo Ar dheis |
Feidhm 303 Barra Maol Cruach Dhosmálta |
1.Tíre: sceanra, doirtil, sáspan, drumaí meaisín níocháin, líneálacha oscailte micreathonn, lanna rásúir
2.Transourt: córais sceite, Baile Átha Troim carr / gríleanna, tancaeir bóthair, coimeádáin long, tancaeir ceimiceacha long
3.Ola agus Gás: cóiríocht ardán, tráidirí cábla
4.Leighis:Ionstraimí máinliachta, ionchlannáin mháinliachta, scanóirí MRI.
5.Bia agus Deoch: Trealamh lónadóireachta, grúdú, driogadh, próiseáil bia
6.Uisce:Cóireáil uisce agus séarachais, feadáin uisce, umair uisce te
7.Ginearálta: spriongaí, dúntóirí (boltaí, cnó agus niteoirí), sreang
8.Ceimiceach / Cógaisíochta: soithí brú, píopaí próisis
9.Ailtireachta/Innealtóireacht Shibhialta: cumhdach, ráillí láimhe, feisteas doirse agus fuinneoige, troscán sráide, struchtúrach, ranna, barra treisithe, colúin soilsithe, fardorais, tacaí saoirseachta
Comhdhéanamh ceimiceach Barra Maol Cruach Dhosmálta: |
Austenít Cruach dhosmálta Ferrite | 329J1 | 0Cr26Ni5Mo2 | <0.08 | 23.00-28.00 | 3.00-6.00 | <1.50 | <0.035 | <0.030 | 1.00-3.00 | <1.00 | - | 2) |
1Cr18Ni11Si4AlTi | 0.10-0.18 | 17.50-19.50 | 10.–120. . | <0.80 | <0.035 | <0.030 | - | 3.40-4.00 | - | Al 0.10-0.30; Ti 0.40-0.70 | ||
00Cr18Ni5MoSi2 | <0.030 | 18.00-19.50 | 4.50-5.50 | 1.00-2.00 | <0.035 | <0.030 | 2.50-3.00 | 1.30-2.00 | - | - | ||
Cruach dhosmálta Ferrite | 405 | 0Cr13Al | <0.08 | 11.50-14.50 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | Al 0.10-0.30 |
410L | 00Cr12 | <0.030 | 11.00-13.00 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
430 | 1Cr17 | <0.12 | 16.00-18.00 | 3) | <1.25 | <0.035 | <0.030 | - | <0.75 | - | - | |
430F | Y1Cr17 | <0.12 | 16.00-18.00 | 3) | <1.00 | <0.035 | <0.15 | 1) | <1.00 | - | - | |
434 | 1Cr17Mo | <0.12 | 16.00-18.00 | 3) | <1.00 | <0.035 | <0.030 | 0.75-1.25 | <1.00 | - | - | |
447J1 | 00Cr30Mo2 | <0. 010 | 28.50-32.00 | - | <0.40 | <0.035 | <0.030 | 1.50-2.50 | <0.40 | <0.015 | - | |
XM27 | 00Cr27Mo | <0. 010 | 25.00-27.50 | - | <0.40 | <0.035 | <0.030 | 0.75-1.50 | <0.40 | <0.015 | - |
Martensite cruach dhosmálta | 403 | 1Cr12 | <0.15 | 11.50-13.00 | 3) | <1.00 | <0.035 | <0.030 | - | <0.50 | - | - |
410 | 1Cr13 | <0.15 | 11.50-13.50 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
405 | 0Cr13 | <0.08 | 11.50-13.50 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
416 | Y1Cr13 | <0.15 | 12.00-14.00 | 3) | <1.25 | <0.035 | <0.15 | 1) | <1.00 | - | - | |
410J1 | 1Cr13Mo | <0.08-0.18 | 11.50-14.00 | 3) | <1.00 | <0.035 | <0.030 | 0.30-0.60 | <0.60 | - | - | |
420J1 | 2Cr13 | 0.16-0.25 | 12.00-14.00 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
420J2 | 3Cr13 | 0.26-0.35 | 12.00-14.00 | 3) | <1.00 | <0.035 | <0.030 | - | <1.00 | - | - | |
420F | Y3Cr13 | 0.26-0.40 | 12.00-14.00 | 3) | <1.25 | <0.035 | <0.15 | 1) | <1.00 | - | - | |
3Cr13Mo | 0.28-0.35 | 12.00-14.00 | 3) | <1.00 | <0.035 | <0.030 | 0.50-1.00 | <0.80 | - | - | ||
4Cr13 | 0.36-0.45 | 12.00-14.00 |