310S 310 Stainless Steel Wire
Short Description:
| Stainless Steel Bright wire producing form Saky Steel |
| Specifications of Stainless Steel Wire: |
Specifications : ASTM A580
Grade: 304, 310 310S, 310, 310s, 316
Wire diameter : 0.1 to 5.0mm
Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh
Surface: Bright, Dull
Delivery state: Soft annealed – ¼ hard, ½ hard, ¾ hard, full hard
| 310 310s Stainless Steel Wire Chemical Composition: |
| Grade | C | Mn | Si | P | S | Cr | Ni |
| 310 | 0.25 max | 2.0 max | 1.5 max | 0.045 max | 0.030 max | 24.0 – 26.0 | 19.0- 22.0 |
| 310S | 0.08 max | 2.0 max | 1.5 max | 0.045 max | 0.030 max | 24.0 – 26.0 | 19.0- 22.0 |
| 310S WIRE COIL MECHANICAL & PHYSICAL PROPERTIES: |
| Density | 8.0 g/cm3 |
| Melting Point | 1454 °C (2650 °F) |
| Tensile Strength | Psi – 75000, MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000, MPa – 205 |
| Elongation | 35 % |
| S31008 1.4845 Stainless Spring Wire Stock From SakySteel: |
| Material | Surface | Wire Diameter | Inspection Certificate |
| 310 310S | Dull & Bright | Φ0.4-Φ0.45 | TSING & YongXing & WuHang |
| 310 310S | Dull & Bright | Φ0.5-Φ0.55 | TSING & YongXing & WuHang |
| 310 310S | Dull & Bright | Φ0.6 | TSING & YongXing & WuHang |
| 310 310S | Dull & Bright | Φ0.7 | TSING & YongXing & WuHang |
| 310 310S | Dull & Bright | Φ0.8 | TSING & YongXing & WuHang |
| 310 310S | Dull & Bright | Φ0.9 | TSING & YongXing & WuHang |
| 310 310S | Dull & Bright | Φ1.0-Φ1.5 | TSING & YongXing & WuHang |
| 310 310S | Dull & Bright | Φ1.6-Φ2.4 | TSING & YongXing & WuHang |
| 310 310S | Dull & Bright | Φ2.5-4.0 | TSING & YongXing & WuHang |
| Stainless Steel wire State |
ASTM A580 standard specifies the specifications of stainless steel wire, which is applicable to cold-drawn stainless steel wire, including mechanical properties in different hardness states. ASTM A313 standard specifies the specifications of spring stainless steel wire, and describes in detail the mechanical properties and heat treatment requirements in different hardness states.
| State | Hardness(HB) | Tensile Strength(MPa) |
| Soft Annealed | 80-150 | 500-750 |
| ¼ Hard | 150-200 | 750-950 |
| ½ Hard | 200-250 | 950-1150 |
| ¾ Hard | 250-300 | 1150-1350 |
| Full Hard | 300-400 | 1350-1600 |
| Why Choose Us : |
1. You can get the perfect material according to your requirement at the least possible price.
2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. e guarantee to give a response within 24hours(usually in the same hour)
5. You can get stock alternatives, mill deliveries with minimizing manufacturing time.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
| SAKY STEEL’S Quality Assurance (including both Destructive and Non-Destructive) : |
1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Impact analysis
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Roughness Testing
10. Metallography Experimental Test
| SAKY STEEL’S Packaging: |
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Saky Steel’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
Application:
Furnace parts
Heat Exchangers
Paper Mill Equipment
Exhaust Parts in Gas Turbines
Jet Engine Parts
Oil Refinery Equipment
